NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
FEPF6AT THRU FEPF6DT
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts
Forward Current - 6.0 Amperes
FEATURES
ITO-220AB
♦ Plastic package has carries Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive center-tap
♦ Glass passivated chip junctions
0.188 (4.77)
0.172 (4.36)
0.405 (10.27)
0.383 (9.72)
0.110 (2.80)
0.100 (2.54)
♦ Superfast recovery times for high efficiency
♦ Low power loss
0.131 (3.39)
0.122 (3.08)
0.140 (3.56)
0.130 (3.30)
DIA.
DIA.
♦ Low forward voltage, high current capability
♦ For use in low voltage, high frequency inverters,
free wheeling and polarity protection applications
♦ High temperature soldering guaranteed:
250°C, 0.25" (6.35mm) from case for 10 seconds
0.600 (15.5)
0.580 (14.5)
0.350 (8.89)
0.330 (8.38)
0.670 (17.2)
0.646 (16.4)
PIN
3
2
1
0.191 (4.85)
0.171 (4.35)
0.110 (2.80)
0.100 (2.54)
0.560 (14.22)
0.530 (13.46)
0.060 (1.52)
MECHANICAL DATA
Case: JEDEC ITO-220AB molded plastic body over
passivated chips
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
0.037 (0.94)
0.027 (0.69)
0.022 (0.55)
0.014 (0.36)
0.105 (2.67)
0.095 (2.41)
PIN 2
PIN 1
PIN 3
0.205 (5.20)
0.195 (4.95)
Polarity: As marked
Mounting Position: Any
Dimensions in inches and (millimeters)
Weight: 0.08 ounce, 2.24 grams
Mounting Torque: 5 in. - lb. max.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VRRM
VRMS
VDC
FEPF6AT
50
FEPF6BT FEPF6CT
FEPF6DT
200
UNITS
Volts
Volts
Volts
Maximum repetitive peak reverse voltage
Maximum RMS voltage
100
70
150
105
150
35
140
Maximum DC blocking voltage
50
100
200
Maximum average forward rectified current
TC=100°C
I(AV)
6.0
Amps
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
100.0
0.975
Maximum instantaneous forward voltage
per leg at 3.0A
VF
IR
Volts
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
5.0
50.0
µA
Maximum reverse recovery time per leg (NOTE 1)
Typical thermal resistance (NOTE 2)
trr
RΘJC
CJ
35.0
5.4
ns
°C/W
pF
Typical junction capacitance per leg (NOTE 3)
Operating junction and storage temperature range
28.0
TJ, TSTG
-55 to +150
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, Ir=1.0A, Irr=0.25A
(2) Thermal resistance from junction to case per leg mounted on heatsink
(3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
4/98