Datasheet > DS2196LN+

DS2196LN+

更新时间： 2024-10-28 14:49:11

品牌	Logo	应用领域
美信 - MAXIM		电信电信集成电路
页数	文件大小	规格书
157页	706K
描述
Framer, PQFP100, 14 X 14 MM, ROHS COMPLIANT, LQFP-100

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

DS2196LN+ 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	零件包装代码：	QFP
包装说明：	LFQFP,	针数：	100
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.69
Is Samacsys：	N	JESD-30 代码：	S-PQFP-G100
JESD-609代码：	e3	长度：	14 mm
湿度敏感等级：	3	功能数量：	1
端子数量：	100	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	LFQFP	封装形状：	SQUARE
封装形式：	FLATPACK, LOW PROFILE, FINE PITCH	峰值回流温度（摄氏度）：	260
认证状态：	Not Qualified	座面最大高度：	1.6 mm
标称供电电压：	3.3 V	表面贴装：	YES
电信集成电路类型：	FRAMER	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn)	端子形式：	GULL WING
端子节距：	0.5 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	14 mm
Base Number Matches：	1

DS2196LN+ 数据手册

DS2196

T1 Dual Framer LIU

www.maxim-ic.com

GENERAL DESCRIPTION

FEATURES

The DS2196 T1 dual framer LIU is designed for T1

transmission equipment. The DS2196 combines dual

optimized framers together with a LIU. This

combination allows the users to extract and insert

facility data-link (FDL) messages in the receive and

transmit paths, collect line performance data, and

perform basic channel conditioning and maintenance.

The DS2196 contains all of the necessary functions

for connection to T1 lines whether they are DS1 long

haul or DSX–1 short haul. The clock recovery

circuitry automatically adjusts to T1 lines from 0ft to

over 6000ft in length. The device can generate both

DSX–1 line buildouts as well as CSU line buildouts

of -7.5dB, -15dB, and -22.5dB. The on-board jitter

attenuator (selectable to either 32 bits or 128 bits) can

be placed in either the transmit or receive data paths.

The framer locates the frame and multiframe

boundaries and monitors the data stream for alarms.

The device contains a set of internal registers that the

user can access and use to control the unit’s operation

of the unit. Quick access through the parallel control

port allows a single controller to handle many T1

lines. The device fully meets all of the latest T1

specifications.

Two full-featured framers and a short/long-haul

line interface unit (LIU) in one small package

Based on Dallas Semiconductor’s single-chip

transceiver (SCT) family

Two HDLC controllers with 64-byte buffers that

can be used for the FDL or DS0 channels

Supports NPRMs and SPRMs as per ANSI

T1.403-1998

Can be combined with a short/long-haul LIU or a

HDSL modem chipset to create a low-cost office

repeater/NIU/CSU, or a HDSL1/HDSL2 terminal

unit with enhanced monitoring and data link

control

Supports fractional T1

Can convert from D4 to ESF framing and ESF to

D4 framing

32-bit or 128-bit crystal-less jitter attenuator

Can generate and detect repeating in-band

patterns from 1 to 8 bits or 16 bits in length

Detects and generates RAI-CI and AIS-CI

Generates DS1 idle codes

On-chip programmable BERT generator and

detector

All key signals are routed to pins to support

numerous hardware configurations

PACKAGE OUTLINE

Supports both NRZ and bipolar interfaces

Can create errors in the F-bit position and BERT

interface data paths

8-bit parallel control port that can be used

directly on either multiplexed or nonmultiplexed

buses (Intel or Motorola)

DS2196

IEEE 1149.1 JTAG Boundary Scan

3.3V supply with 5V tolerant inputs and outputs

100-pin LQFP (14 mm x 14 mm) package

100

ORDERING INFORMATION

PART

TEMP RANGE PIN-PACKAGE

0ºC to +70ºC 100 LQFP

-40ºC to +85ºC 100 LQFP

DS2196L

DS2196LN

Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device

may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.

1 of 157

093002

12 3 4 5 6 7...157

中文翻译

下载PDF

DS2196LN+ 替代型号

型号	品牌	替代类型	描述	数据表
DS2152L	MAXIM	功能相似	Framer, CMOS, PQFP100, 14 X 14 MM, 1.40 MM HEIGHT, LQFP-100
DS2155LN	DALLAS	功能相似	T1/E1/J1 Single-Chip Transceiver

与DS2196LN+相关器件

型号	品牌	获取价格	描述	数据表
DS21FF42	DALLAS	获取价格	4 X 3 Twelve Channel T1 Framer
DS21FF42	MAXIM	获取价格	Framer, CMOS, PBGA300, 27 X 27 MM, 1.27 MM PITCH, MCMBGA-300
DS21FF42+	MAXIM	获取价格	Framer, CMOS, PBGA300, 27 X 27 MM, 1.27 MM PITCH, ROHS COMPLIANT, MCMBGA-300
DS21FF42N	DALLAS	获取价格	Framer, CMOS, PBGA300, 27 X 27 MM, BGA-300
DS21FF44	DALLAS	获取价格	4x3 Twelve Channel E1 Framer, 4x4 Sixteen Channel E1 Framer
DS21FF44N	DALLAS	获取价格	Framer, CMOS, PBGA300, 27 X 27 MM, BGA-300
DS21FT40	DALLAS	获取价格	Four x Three 12 Channel E1 Framer
DS21FT40N	DALLAS	获取价格	Framer, CMOS, PBGA300, BGA-300
DS21FT42	DALLAS	获取价格	4 X 3 Twelve Channel T1 Framer
DS21FT42+	MAXIM	获取价格	Framer, CMOS, PBGA300, 27 X 27 MM, 1.27 MM PITCH, ROHS COMPLIANT, BGA-300

与DS2196LN+相关文章

三星深化印度制造布局，供应链本地化进程加速
2024-10-29

13
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

13
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
2024-10-18

40
意法半导体发布第四代SiC技术，助力电动汽车电驱
2024-10-15

47

产品中心

服务支持

精选活动

关于我们

帮助中心

DS2196LN+

DS2196LN+ 技术参数

DS2196LN+ 数据手册

DS2196LN+ 替代型号

与DS2196LN+相关器件

与DS2196LN+相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DS2196LN+

DS2196LN+ 技术参数

DS2196LN+ 数据手册

DS2196LN+ 替代型号

与DS2196LN+相关器件

与DS2196LN+相关文章

您还可以找

您在本页遇到什么问题？