DAC5672-EP
www.ti.com
SGLS339A–JUNE 2006–REVISED OCTOBER 2006
DUAL 14-BIT 200-MSPS DIGITAL-TO-ANALOG CONVERTER
FEATURES
•
WCDMA Adjacent Channel Leakage Ratio
(ACLR): 78 dB at Baseband
•
Controlled Baseline
•
•
•
•
•
•
•
WCDMA ACLR: 73 dB at 30.72 MHz
Independent or Single Resistor Gain Control
Dual or Interleaved Data
– One Assembly
– One Test Site
– One Fabrication Site
On-Chip 1.2-V Reference
•
•
Extended Temperature Performance of
–55°C to 125°C
Low Power: 330 mW
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Power-Down Mode: 9 mW
Package: 48-Pin Thin-Quad Flat Pack (TQFP)
•
•
•
Enhanced Product-Change Notification
(1)
APPLICATIONS
Qualification Pedigree
•
Cellular Base Transceiver Station Transmit
Channel
14-Bit Dual Transmit Digital-to-Analog
Converter (DAC)
– CDMA: W-CDMA, CDMA2000, IS-95
– TDMA: GSM, IS-136, EDGE/UWC-136
Medical/Test Instrumentation
Arbitrary Waveform Generators (ARB)
Direct Digital Synthesis (DDS)
•
•
•
200-MSPS Update Rate
Single Supply: 3 V to 3.6 V
•
•
•
•
High Spurious-Free Dynamic Range (SFDR):
84 dBc at 5 MHz
•
High Third-Order Two-Tone Intermodulation
(IMD3): 79 dBc at 15.1 MHz and 16.1 MHz
Cable Modem Termination System (CMTS)
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
DESCRIPTION
The DAC5672 is a monolithic, dual-channel, 14-bit, high-speed digital-to-analog converter (DAC) with on-chip
voltage reference.
Operating with update rates of up to 200 MSPS, the DAC5672 offers exceptional dynamic performance, tight
gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication
applications.
Each DAC has a high-impedance, differential-current output, suitable for single-ended or differential
analog-output configurations. External resistors allow scaling the full-scale output current for each DAC
separately or together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature
compensated and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.
The DAC5672 has two 14-bit parallel input ports with separate clocks and data latches. For flexibility, the
DAC5672 also supports multiplexed data for each DAC on one port when operating in the interleaved mode.
The DAC5672 has been specifically designed for a differential transformer-coupled output with a 50-Ω
doubly-terminated load. For a 20-mA full-scale output current, both a 4:1 impedance ratio (resulting in an output
power of 4 dBm) and 1:1 impedance ratio transformer (–2 dBm output power) are supported.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.