DAC5662
www.ti.com
SLAS425–JULY 2004
DUAL, 12-BIT 200 MSPS DIGITAL-TO-ANALOG CONVERTER
FEATURES
APPLICATIONS
•
Cellular Base Transceiver Station Transmit
Channel
•
•
•
•
•
•
•
•
•
•
•
•
12-Bit Dual Transmit DAC
200 MSPS Update Rate
– CDMA: W-CDMA, CDMA2000, IS-95
– TDMA: GSM, IS-136, EDGE/UWC-136
Medical/Test Instrumentation
Arbitrary Waveform Generators (ARB)
Direct Digital Synthesis (DDS)
Cable Modem Termination System (CMTS)
Single Supply: 3.0 V - 3.6 V
High SFDR: 85 dBc at 5 MHz
High IMD3: 78 dBc at 15.1 and 16.1 MHz
WCDMA ACLR: 70 dB at 30.72 MHz
Independent or Single Resistor Gain Control
Dual or Interleaved Data
•
•
•
•
WRTB
WRTA
CLKB CLKA
On-Chip 1.2-V Reference
Low Power: 330 mW
DE
MUX
Power-Down Mode: 15 mW
Package: 48-Pin TQFP
IOUTA1
IOUTA2
Latch A
12−b DAC
DA[11:0]
BIASJ_A
IOUTB1
IOUTB2
Latch B
DB[11:0]
12−b DAC
MODE
GSET
BIASJ_B
EXTIO
1.2 V Reference
SLEEP
DVDD
DGND
AVDD
AGND
Figure 1.
DESCRIPTION
The DAC5662 is a monolithic, dual-channel 12-bit high-speed digital-to-analog converter (DAC) with on-chip
voltage reference.
Operating with update rates of up to 200 MSPS, the DAC5662 offers exceptional dynamic performance and
tight-gain and offset matching, characteristics that make it suitable in either I/Q baseband or direct IF
communication applications.
Each DAC has a high-impedance differential current output, suitable for single-ended or differential analog-output
configurations. External resistors allow scaling the full-scale output current for each DAC separately or together,
typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature compensated and
delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.
The DAC5662 has two 12-bit parallel input ports with separate clocks and data latches. For flexibility, the
DAC5662 also supports multiplexed data for each DAC on one port when operating in the interleaved mode.
The DAC5662 has been specifically designed for a differential transformer coupled output with a 50-Ω doubly
terminated load. For a 20-mA full-scale output current a 4:1 impedance ratio (resulting in an output power of
4 dBm) and 1:1 impedance ratio transformer (-2 dBm output power) are supported.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2004, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.