DA9072
Ultra-Low Quiescent Current PMIC
General Description
DA9072 is a highly integrated, configurable, low quiescent current power management IC (PMIC)
that integrates the most common needs for wearables, home automation, and low power battery
applications.
The PMIC comprises a linear charger with power path management, ultra-low quiescent current (IQ)
buck regulator and LDO/load switches, analog battery monitor, watchdog and protection features in
an I2C configurable compact WLCSP package.
DA9072 has several power saving modes to increase battery life whether the product sits on the
shelf or is in operation. Further savings in power are achieved with the ultra-low IQ buck converter
(efficient down to 10 µA load currents) and low IQ LDOs. The uncommitted inputs of LDOs can be
connected to either the battery or buck output.
DA9072 provides charge current up to 500 mA to speed up the charge cycle. The charge profile is
programmable by external resistors or in software, allowing either stand-alone operation or host
control.
DA9072 includes dynamic power path management which automatically balances current delivered
to the system and for battery charging.
Suitable for small battery applications, the battery monitors facilitate on-demand battery voltage and
discharge current information to an external MCU’s ADC to support software-based fuel gauging.
Key Features
■
Increased battery life
■ High integration and configurability
□
800 nA (no load, total battery current) buck
converter, programmable down to 0.6 V,
300 mA-capable
□
I2C enabled analog battery monitors for
software-based fuel gauging
□
Watchdog input and power cycling to
prevent system stall
□
Three configurable 800 nA quiescent
current LDOs/load switches, 150 mA-
capable
□
□
□
Reset input and status outputs
Low external component count
■
■
Power saving modes optimized for storage
and operation
Compact 42 pin, 2.97 mm x 2.66 mm
WLCSP package
Battery protection
■
Fast charge
□
Battery thermal- and over-discharge
protection
□
□
500 mA (max) charge current; 2 mA (min)
Programmable pre-charge, fast charge,
and termination voltage
□
□
20 V tolerant input
Automatic battery temperature monitoring
in all operation modes
□
□
□
Dynamic power path balances multiple
power sources
■
Configurable battery monitors
Termination current programmable down
to 500 µA
□
□
□
Battery current (IMON)
Battery voltage (VBAT_DIV)
Battery temperature (TEMP_SNS)
±0.5 % accurate termination voltage
Applications
■
Wearable devices - fitness trackers, smart
watches, wireless headphones
■
■
■
Health monitoring medical accessories
Rechargeable toys
■
Home automation devices - smoke detectors,
smart thermostats, smart door locks
High efficiency, ultra-low power applications
Datasheet
Revision 3.2
13-Jun-2023
CFR0011-120-00
1 of 117
© 2023 Renesas Electronics