DA9061-A
PMIC for Applications Requiring up to 6 A
General Description
DA9061-A is a power management integrated circuit (PMIC) optimized for supplying systems with
single- and dual-core processors, I/O, DDR memory, and peripherals. It targets car navigation,
vehicle infotainment systems, automotive telematics and FPGA based applications.
DA9061-A features three buck converters providing a total current of 6 A. High efficiency is achieved
over a wide load range with PFM mode available for low power or sleep modes. All power switches
are integrated; therefore, external Schottky diodes are not required. Furthermore, low-profile
inductors can be used with DA9061-A. The four LDO regulators with programmable output voltage
provide up to 300 mA.
Dynamic voltage control (DVC) allows dynamic control of DA9061-A supply voltages according to the
operating point of the system. It is controlled by writing directly to the registers using the I2C
compatible 2-wire interface or the GPIOs.
DA9061-A features a programmable power sequencer that handles start-up and shutdown
sequences. Power mode transitions can be triggered with software control, GPIOs, or with the on-
key. Several types of on-key presses can be detected to trigger different power mode transitions.
An integrated watchdog timer monitors the system.
Five GPIOs are able to perform system functions, including: keypad supervision, application buck,
and timing-controlled external regulators/power switches or other ICs.
DA9061-A is also available as a consumer and industrial version DA9061.
Key Features
■
■
Input voltage 2.8 V to 5.5 V
■
■
Programmable power mode sequencer
Three buck converters with dynamic voltage
control:
System supply and junction temperature
monitoring
□
□
□
□
Buck1: 0.3 V to 1.57 V, 2.5 A
Buck2: 0.8 V to 3.34 V, 2 A
Buck3: 0.53 V to 1.8 V, 1.5 A
■
■
■
■
Watchdog timer
Five GPIOs
-40 °C to +125 °C junction temperature range
3 MHz switching frequency (enables low
profile inductors)
40-pin QFN, 6 mm × 6 mm package, 0.5 mm
pitch
■
Four LDO regulators:
■
Automotive AEC-Q100 Grade 2 (-40 °C to
105 °C)
□
□
LDO1: 0.9 V to 3.6 V, 100 mA
LDO2, LDO3, LDO4: 0.9 V to 3.6 V,
300 mA
Applications
■
■
■
Car navigation systems
■
■
■
Portable industrial and medical devices
Automotive infotainment
Telematics
FPGAs
Single core application processors
Datasheet
Revision 2.6
11-Feb-2022
CFR0011-120-00
1 of 90
© 2022 Renesas Electronics