DA9070
Ultra-Low Quiescent Current PMIC
General Description
DA9070 is a highly integrated, configurable, low quiescent current PMIC that integrates the most
common needs for wearables, home automation and low power battery applications.
The Power Management IC (PMIC) comprises a linear charger with Power Path management, ultra-
low quiescent current (Iq) buck regulator and LDO/Load Switches, wide output voltage boost
regulator, analog battery monitor, watchdog and protection features in an I2C configurable compact
WLCSP package.
DA9070 has several power saving modes to increase battery life whether the product sits on the
shelf or is in operation. Further savings in power are achieved with the ultra-low Iq buck converter
that is efficient down to 10 µA load currents and low Iq LDOs. The uncommitted inputs of LDOs can
be connected to either the battery or buck output.
The integrated, high-efficiency boost regulator supports both sensors and display supply needs with
a wide range configurable output voltage.
DA9070 provides charge current up to 500 mA to speed up the charge cycle. The charge profile is
programmable by external resistors or in software, allowing either stand-alone operation or host
control.
DA9070 includes dynamic power path management which automatically balancing current delivered
to the system and battery charging.
Suitable for small battery applications, the battery monitor facilitates on-demand battery voltage and
discharge current monitors to an external MCU’s ADC for supporting software fuel gauging.
Key Features
■
Increased battery life
■ High integration and configurability
□
800 nA (no load, total battery current) buck
converter, programmable down to 0.6 V,
300 mA-capable
□
□
□
Wide output voltage boost regulator
(4.5V to 18 V)
I2C enabled analog battery monitors for
Software Fuel Gauging
□
Three configurable 800nA Quiescent
Current LDOs/Load Switches, 150 mA-
capable
Watchdog input and power-cycling to
prevent system stall
■
■
Power saving modes optimized for storage
and operation
□
□
□
Reset input and status outputs
Low external component count
Battery protection
Compact, 42 pin, 2.97 mm x 2.66 mm
WLCSP package
□
Battery thermal- and over-discharge
protection
■
Fast charge
□
□
20 V tolerant input
□
□
500 mA (max) charge current; 2 mA (min)
Automatic battery temperature monitoring
in all operation modes
Programmable pre-charge, fast charge,
and termination voltage
■
Configurable battery monitors
□
□
□
Dynamic power path balances multiple
power sources
□
□
□
Battery current (IMON)
Battery voltage (VBAT_DIV)
Battery temperature (TEMP_SNS)
Termination current programmable down
to 500 µA
±0.5 % accurate termination voltage
Datasheet
Revision 3.3
13-Oct-2020
1 of 130
© 2020 Dialog Semiconductor