CYW20829B0-P4TAI100, CYW20829B0-P4EPI100
AIROC™ Bluetooth® LE module
General description
The CYW20829B0-P4TAI100 is a fully integrated Bluetooth® LE wireless module. The CYW20829B0-P4TAI100
includes an onboard crystal oscillator, passive components, flash memory, and the CYW20829 silicon device.
Refer to the CYW20829 datasheet for additional details on the capabilities of the silicon device used in this
module.
The CYW20829B0-P4TAI100 supports high-performance analog-to-digital conversion audio input, I2S/PCM, CAN,
LIN for automotive use cases and other standard communication and timing peripherals. The
CYW20829B0-P4TAI100 includes a royalty-free Bluetooth® stack compatible with Bluetooth® 5.4 core spec in a
14.5 × 19 × 1.95 mm package.
The CYW20829B0-P4TAI100 includes 1 MB of onboard serial flash memory and is designed for standalone
operation. The CYW20829B0-P4TAI100 uses an integrated power amplifier to achieve Class I or Class II output
power capability.
The CYW20829B0-P4TAI100 is fully qualified by Bluetooth® SIG and is targeted at applications requiring
cost-optimized Bluetooth® wireless connectivity.
The CYW20829B0-P4TAI100 is offered in two certified versions CYW20829B0-P4TAI100, and
CYW20829B0-P4EPI100. The CYW20829B0-P4TAI100 includes an integrated trace antenna. The
CYW20829B0-P4EPI100 supports an external antenna through a RF solder pad output.
Module description
• Module size: 14.5 × 19 × 1.95 mm
• Bluetooth® 5.4 core spec qualified module
- QDID: TBD
- Declaration ID: TBD
• Certified to FCC, ISED, MIC, and CE regulations
• Castelated solder pad connections for ease-of-use
• 1-MB on-module serial flash memory
• Up to 26 GPIOs
• Temperature range: –30°C to +85°C
• 96-MHz Arm® Cortex®-M33 CPU with single-cycle multiply and memory protection unit (MPU)
• Maximum TX output power
- Programmable TX power: up to 10 dBm
• Bluetooth® LE connection range of up to 500 meters at 10 dBm[1]
• RX sensitivity:
- LE-1 Mbps: –98 dBm
- LE-2 Mbps: –95 dBm
- Coded PHY 500 kbps (LE-LR): –101 dBm
- Coded PHY 125 kbps (LE-LR): –106 dBm
Note
1. Connection range tested module-to-module using Bluetooth® Low Energy Long Range Coded PHY technology
in full line-of-sight environment, free of obstacles or interference sources with output power of +10.0 dBm.
Actual range will vary based on end product design, environment, receive sensitivity, and transmit output
power of the central device.
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1
002-39262 Rev. **
2024-01-23