Datasheet
System Motor Driver
BD64008MUV
General Description
Key Specifications
This is a system motor driver with integrated 2ch
H-bridge driver (Parallel is for exclusive use), 2ch buck
switching regulator (SWREG) with built-in Power MOS,
and Reset output.
◼
◼
◼
◼
◼
◼
Input Voltage Range
9.0 V to 45.0 V
2.0 A/Phase
0 A to 2.0 A
0 A to 1.4 A
-25 °C to +85 °C
100 µA (Max)
Motor Rated Output Current
SWREG1 Output Current Range
SWREG2 Output Current Range
Operating Temperature Range
Standby Current
Features
◼
◼
◼
◼
◼
Low ON-resistance Output H-bridge Driver (2ch)
Built-in Regular Current Chopping Function
Over-current Protection in H-bridge Driver
3-line Serial Type Interface
H-bridge Parallel Driver (Large Mode) Single
Purpose
Package
W (Typ) x D (Typ) x H (Max)
7.0 mm x 7.0 mm x 1.0 mm
VQFN048V7070
◼
◼
◼
◼
◼
◼
◼
◼
◼
◼
SWREG (CH1) with Built-in P-ch Power DMOS FET
High Efficiency SWREG Function
Soft Start Function in SWREG
Over-current Protection (OCP) in SWREG
Output Under Voltage Protection (UVLO) in SWREG
SWREG Enable Function
Thermal Shutdown Function (TSD)
Power ON Reset
VBB Drop Detection Function
Micro Type, Ultra-thin Type, High Heat Dissipation
(Back side heat radiation) Package
Applications
◼
◼
Business Inkjet Printers
Large Format Printer, etc.
Typical Application Circuit
VBBA
VREFA
4bit DAC
(1/10)
OUTAP
OUTAM
RNFAS
RNFA
VREFB
RNFAS
PRE
DRIVER
LOGIC
VBBB
SLEEP
ENBA,ENBB
CLK,STB(LD),DAT
ID0,ID1,ID2
OUTBP
OUTBM
internal reg.
RSTIN
RNFB
RNFBS
ENBSW1
ENBSW2
PWM
internal reg.
VBBSW1
SWOUT1
MODE
PRE
DRIVER
R
S
Q
Q
DAC for
soft start
FB1
OSC
FB1
BOOT
R
S
DAC for
soft start
VINSW2
SWOUT2
PGNDSW2
FB2
PRE
DRIVER
COMP
OSC
internal reg.
Regulator
Clock
OCP
FB2
OCPDET
UVDET
RESET
UVDETIN
TSD
UVP
GND
〇Product structure : Silicon monolithic integrated circuit 〇This product has no designed protection against radioactive rays
www.rohm.com
© 2017 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0P2P0B001840-1-2
16.Nov.2020 Rev.005
1/36