5秒后页面跳转
ADP5310AREZN-3.3R7 PDF预览

ADP5310AREZN-3.3R7

更新时间: 2024-09-15 20:02:23
品牌 Logo 应用领域
亚德诺 - ADI 开关光电二极管
页数 文件大小 规格书
29页 813K
描述
3-Channel, Integrated Ultralow Power Solution with Dual Buck Regulators and Load Switch

ADP5310AREZN-3.3R7 数据手册

 浏览型号ADP5310AREZN-3.3R7的Datasheet PDF文件第2页浏览型号ADP5310AREZN-3.3R7的Datasheet PDF文件第3页浏览型号ADP5310AREZN-3.3R7的Datasheet PDF文件第4页浏览型号ADP5310AREZN-3.3R7的Datasheet PDF文件第5页浏览型号ADP5310AREZN-3.3R7的Datasheet PDF文件第6页浏览型号ADP5310AREZN-3.3R7的Datasheet PDF文件第7页 
3-Channel, Integrated Ultralow Power Solution  
with Dual Buck Regulators and Load Switch  
Data Sheet  
ADP5310  
FEATURES  
TYPICAL APPLICATION CIRCUIT  
Wide input voltage range: 2.7 V to 15.0 V  
700 nA quiescent current when EN1 = SYNC/MODE = low  
1.5% output accuracy over full temperature range in PWM mode  
600 kHz (or 1.2 MHz) switching frequency with optional  
synchronization input from 400 kHz to 1.4 MHz  
Channel 1: 800 mA buck regulator  
Automatic PSM/PWM or forced PWM mode via factory fuse  
100% duty cycle operation mode  
Adjustable/fixed output options via factory fuse  
Power-good flag  
Channel 2: ultralow power buck regulator  
Selectable hysteresis or PWM operation mode  
Output current up to 50 mA in hysteresis mode, 300 mA in  
PWM mode with 100% duty cycle operation mode  
Low noise at 0.8 V reference in PWM mode  
Adjustable/fixed output voltage options via factory fuse  
Channel 3: high-side load switch  
L1  
4.7µH  
ADP5310  
V
V
V
OUT1  
OUT2  
OUT3  
EN1  
SW1  
FROM MCU  
TO MCU  
CHANNEL 1  
C3  
PWRGD  
PVIN1  
BUCK  
REGULATOR  
(800mA)  
PGND1  
FB1  
10µF  
MLCC  
V
=
IN  
R1  
R2  
2.7V TO 15V  
L2  
4.7µH  
PVIN2  
NC  
CHANNEL 2  
SW2  
ULTRALOW  
C1  
10µF  
C4  
10µF  
MLCC  
POWER  
PGND2  
FB2  
BUCK  
MLCC SYNC/  
MODE  
REGULATOR  
(50mA/300mA)  
CHANNEL 3  
LOAD  
SWITCH  
EN3  
VOUT3  
FROM MCU  
C5  
220nF  
MLCC  
VREG  
AGND  
C6  
1µF  
Figure 1.  
Low RDS(ON) of 494 mΩ at VOUT3 = 2.5 V  
Quick output discharge (QOD) option  
UVLO, OCP, and TSD protection  
16-lead TSSOP_EP package  
−40°C to +125°C operational junction temperature  
APPLICATIONS  
Energy (gas and water) metering  
Portable and battery-powered equipment  
Medical applications  
Keep-alive power supplies  
mode, which draws only 700 nA of quiescent current to regulate  
the output under zero load and provides up to 50 mA of output  
current. Hysteresis mode helps achieve excellent efficiency at less  
than 1 mW and can work as a keep-alive power supply in a battery-  
powered system. When the SYNC/MODE pin is set to high, the  
buck regulator switches to a traditional constant frequency PWM  
control scheme to provide low output ripple for noise sensitive  
applications, and the buck regulator provides up to 300 mA of  
output current in PWM mode.  
GENERAL DESCRIPTION  
The ADP5310 combines dual buck regulators and one load switch  
in a 16-lead TSSOP_EP package that meets demanding perfor-  
mance and board space requirements. The device enables direct  
connection to a wide input voltage range of 2.7 V to 15.0 V, allowing  
the use of multiple alkaline/NiMH or lithium cells and other  
power sources.  
The buck regulator in Channel 1 uses a current mode, constant  
frequency pulse-width modulation (PWM) control scheme for  
excellent stability and transient performance, which provides up  
to 800 mA of output current. The automatic PWM/pulse skipping  
mode (PSM) control scheme achieves excellent efficiency in light  
output current. A power-good signal indicates that the output  
of Channel 1 is within 92% of its nominal value.  
Channel 3 integrates a high-side load switch that operates from  
1.65 V to 5.5 V with its input connected to the output of Channel 2.  
The load switch provides power domain isolation and extends  
battery operation time.  
Other key safety features of the ADP5310 include overcurrent  
protection (OCP), thermal shutdown (TSD), and input under-  
voltage lockout (UVLO). The ADP5310 is rated for the −40°C  
to +125°C junction temperature range.  
An ultralow power buck regulator is integrated in Channel 2 with  
the SYNC/MODE pin to control its operation mode. When  
SYNC/MODE is set to low, the buck regulator operates in hysteresis  
Rev.  
A
Document Feedback  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registered trademarks are the property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Technical Support  
©2015–2016 Analog Devices, Inc. All rights reserved.  
www.analog.com  
 
 
 
 

与ADP5310AREZN-3.3R7相关器件

型号 品牌 获取价格 描述 数据表
ADP5320 ADI

获取价格

用于多种电池类型的可穿戴电源管理解决方案
ADP5350 ADI

获取价格

集成感性升压LED和三个LDO调节器的高级电池管理PMIC
ADP5360 ADI

获取价格

Advanced Battery Management PMIC with Ultra Low Power Buck and Buck Boost
ADP5360ACBZ-1-R7 ADI

获取价格

Advanced Battery Management PMIC with Ultra Low Power Buck and Buck Boost
ADP5360ACBZ-2-R7 ADI

获取价格

Advanced Battery Management PMIC with Ultra Low Power Buck and Buck Boost
ADP5360CB-EVALZ ADI

获取价格

Advanced Battery Management PMIC with Ultra Low Power Buck and Buck Boost
ADP5501 ADI

获取价格

Programmable Current Backlight Driver with Ambient Light Sensor Input
ADP5501ACPZ-RL ADI

获取价格

Programmable Current Backlight Driver with Ambient Light Sensor Input
ADP5501ACPZ-RL ROCHESTER

获取价格

SPECIALTY ANALOG CIRCUIT, QCC24, 4 X 4 MM, ROHS COMPLIANT, MO-220VGGD-2, LFCSP-24
ADP5520 ADI

获取价格

Backlight Driver with I/O Expander