Data Sheet
ADP5320
Wearable Power Management Solution for Multiple Battery Types
FEATURES
GENERAL DESCRIPTION
► Wide input supply voltage range: 1.8 V to 5.5 V
► Low quiescent current: 5.1 µA standby mode, including UVLO
► 16-bit coulomb counter fuel gauge with integrated high-side
current sensing resistor
► 12-bit ADC to monitor battery voltage, output voltages, and
junction temperature
The ADP5320 highly integrated power management unit (PMU)
combines nine digitally adjustable regulators, a fuel gauge, a 12-bit
analog-to-digital converter (ADC), 2 kb of one time programmable
(OTP) memory, anticounterfeit logic in a 42-ball, 2.880 mm ×
2.980 mm WLCSP. The regulators include: 2× buck-boost, 1× buck
regulator, 5× low dropout (LDO) regulators, and one low input LDO.
The ADP5320 meets demanding performance and board space
requirements for wearable applications.
► Channels 1 and Channel 2: 150 mA low power buck-boost
regulator
The ADP5320 operates from a 1.8 V to 5.5 V input supply voltage
range, enabling the device for use with multiple types of battery
inputs including: 2S/3S Zinc-air coin-cells or Li-poly/Li-ion batteries,
as well as other types of dc power sources.
► Selective buck, boost, or buck-boost operation
► Selective hysteresis or pulse-width modulation (PWM) mode
► Selective PWM frequency: 50 kHz to 225 kHz
► 2× programmable GPIOs for clock synchronization or fast stop
switching input
► Channel 3: 150 mA low power buck regulator
► Channel 4 Through Channel 6, and Channel 8: 50 mA low noise
LDO, 1.65 V to 5.5 V input supply voltage range
The ADP5320 PMU fuel gauge includes a precision 16-bit coulomb
counter that integrates battery current flowing through the device.
A 12-bit ADC is included to monitor battery voltage, output supply
voltages, and the junction temperature. Other features include a
programmable sequencing engine and system fault recovery.
► Channel 7: 50 mA sink current LDO
The ADP5320 PMU buck-boost regulators are high efficiency, step
up and step down regulators that operate at input voltages greater
than, less than, or equal to the regulated output voltage. All regula-
tors, including the six LDOs, are digitally programmable to meet
different power requirements for many applications.
► Channel 9: 50 mA, low noise LDO, 1.0 V to 1.9 V input supply
voltage range
► I2C interface with interrupt warning
► 2 kb OTP memory
► Power-good monitor and watchdog power hard reset
► UVLO, peak current-limit protection, and TSD protection
► Integrated anticounterfeit logic module
► 42-ball, 0.40 mm pitch, 2.880 mm × 2.980 mm WLCSP
► −10°C to +70°C operating junction temperature range
The ADP5320 includes a 2-wire, I2C-compatible, digital interface
and is rated at the −10°C to +70°C operating junction temperature
range.
APPLICATIONS
► Wearable medical applications
► Internet of Things (IoT) applications
► Disposable sensor devices
► Battery-powered devices
For more information about the ADP5320, contact your local Analog Devices, Inc., sales office at ADP5320@analog.com.
Rev. Sp0
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
DOCUMENT FEEDBACK
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
TECHNICAL SUPPORT