18-Bit, 1.5 LSB INL, 250 kSPS PulSAR®
Differential ADC in MSOP/QFN
AD7691
APPLICATION DIAGRAM
FEATURES
+2.3V TO VDD
+2.3V TO +5V
18-bit resolution with no missing codes
Throughput: 250 kSPS
INL: 0.75 LSB typ, 1.5 LSB max ( 6 ppm of FSR)
Dynamic range: 102 dB typ @ 250 kSPS
Oversampled dynamic range: 125 dB @1 kSPS
Noise-free code resolution: 20 bits @ 1 kSPS
Effective resolution: 22.7 bits @ 1 kSPS
SINAD: 101.5 dB typ @ 1 kHz
VIO
SDI
+1.8V TO VDD
REF VDD
IN+
IN–
3- OR 4-WIRE
SCK
SDO
CNV
INTERFACE
±10V, ±5V, ...
(SPI, DAISY CHAIN, CS)
GND
ADA4941
AD7691
THD: −125 dB typ @ 1 kHz
Figure 2.
True differential analog input range: VREF
0 V to VREF with VREF up to VDD on both inputs
No pipeline delay
Table 1. MSOP, QFN1 (LFCSP)/SOT-23
14-/16-/18-Bit PulSAR ADC
400 kSPS
to
500 kSPS Driver
Single-supply 2.3 V to 5 V operation with
1.8 V/2.5 V/3 V/5 V logic interface
Serial interface SPI®/QSPI™/MICROWIRE™/DSP compatible
Daisy-chain multiple ADCs and busy indicator
Power dissipation
5 mW @ 5 V/250 kSPS
50 μW @ 5 V/1 kSPS
Standby current: 1 nA
10-lead package: MSOP (MSOP-8 size) and
3 mm × 3 mm QFN1 (LFCSP) (SOT-23 size)
100
kSPS
250
kSPS
ADC
Type
18-Bit
AD7691
AD7690
ADA4941-1
ADA4841-x
16-Bit True
Differential
AD7684 AD7687
AD7688
AD7693
ADA4941-1
ADA4841-x
16-Bit Pseudo AD7683 AD7685
AD7686
ADA4841-x
Differential/
Unipolar
14-Bit
AD7680 AD7694
AD7940 AD7942
AD7946
ADA4841-x
Pin-for-pin compatible with the18-bit AD7690 and 16-bit
AD7693, AD7688, and AD7687
1 QFN package in development. Contact sales for samples and availability.
GENERAL DESCRIPTION
APPLICATIONS
The AD7691 is an 18-bit, charge redistribution, successive
approximation, analog-to-digital converter (ADC) that operates
from a single power supply, VDD, between 2.3 V and 5 V. It
contains a low power, high speed, 18-bit sampling ADC with no
missing codes, an internal conversion clock, and a versatile
serial interface port. On the CNV rising edge, it samples the
voltage difference between the IN+ and IN− pins. The voltages
on these pins usually swing in opposite phase between 0 V and
REF. The reference voltage, REF, is applied externally and can
be set up to the supply voltage.
Battery-powered equipment
Data acquisitions
Seismic data acquisition systems
DVMs
Instrumentation
Medical instruments
1.5
POSITIVE INL = 0.43LSB
NEGATIVE INL = –0.62LSB
1.0
0.5
Its power scales linearly with throughput.
0
The SPI-compatible serial interface also features the ability,
using the SDI input, to daisy-chain several ADCs on a single
3-wire bus and provides an optional busy indicator. It is compatible
with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate VIO supply.
–0.5
–1.0
–1.5
The AD7691 is housed in a 10-lead MSOP or a 10-lead QFN1
(LFCSP) with operation specified from −40°C to +85°C.
0
65536
131072
CODE
196608
262144
Figure 1. Integral Nonlinearity vs. Code, 5 V
1 QFN package in development. Contact sales for samples and availability.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.