16-Bit, 0.5 LSB, 500 kSPS PulSAR®
Differential ADC in MSOP/LFCSP
Data Sheet
AD7693
FEATURES
APPLICATION DIAGRAM
+2.5V TO +5V
+5V
16-bit resolution with no missing codes
Throughput: 500 kSPS
INL/DNL: 0.25 LSB typ, 0.5 LSB max ( 8 ppm of FSR)
Dynamic range: 96.5 dB
VIO
SDI
+1.8V TO VDD
REF VDD
IN+
SINAD: 96 dB at 1 kHz
THD: −120 dB at 1 kHz
3- OR 4-WIRE
SCK
SDO
CNV
AD7693
INTERFACE
±10V, ±5V, ...
(SPI, DAISY CHAIN, CS)
IN–
GND
ADA4941-1
True differential analog input range: VREF
0 V to VREF with VREF up to VDD on both inputs
No pipeline delay
Figure 2.
Single-supply 5 V operation with
1.8 V/2.5 V/3 V/5 V logic interface
Proprietary serial interface
SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible1
Daisy-chain multiple ADCs, selectable busy indicator
Power dissipation: 40 nJ/conversion
40 µW at 5 V/1 kSPS
4 mW at 5 V/100 kSPS
18 mW at 5 V/500 kSPS
Standby current: 1 nA
Table 1. MSOP, LFCSP/SOT-23
14-/16-/18-Bit PulSAR ADC
400 kSPS
to
500 kSPS Driver
100
kSPS
250
kSPS
ADC
Type
18-Bit
AD7691
AD7690
ADA4941-1
ADA4841-x
16-Bit True
Differential
AD7684 AD7687
AD7688
AD7693
ADA4941-1
ADA4841-x
16-Bit Pseudo AD7683 AD7685
AD7686
ADA4841-x
ADA4841-x
Differential/
Unipolar
AD7680 AD7694
10-lead package: MSOP (MSOP-8 size) and
3 mm × 3 mm LFCSP (SOT-23 size)
Pin-for-pin compatible with the 16-bit AD7687 and AD7688
and the 18-bit AD7690 and AD7691
14-Bit
AD7940 AD7942
AD7946
GENERAL DESCRIPTION
APPLICATIONS
The AD7693 is a 16-bit, successive approximation analog-to-
digital converter (ADC) that operates from a single power supply,
VDD. It contains a low power, high speed, 16-bit sampling ADC
with no missing codes, an internal conversion clock, and a
versatile serial interface port. The reference voltage, VREF, is
applied externally and can be set up to the supply voltage, VDD.
On the CNV rising edge, it samples the voltage difference
between the IN+ and IN− pins. The voltages on these pins
swing in opposite phase between 0 V and VREF about VREF/2.
Battery-powered equipment
Data acquisitions
Seismic data acquisition systems
DVMs
Instrumentation
Medical instruments
1.0
POSITIVE INL = +0.17LSB
NEGATIVE INL = –0.17LSB
0.8
0.6
0.4
Its power scales linearly with throughput.
Using the SDI input, the SPI-compatible serial interface also
features the ability to daisy-chain several ADCs on a single
3-wire bus and provides an optional busy indicator. It is compatible
with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate VIO supply.
0.2
0
–0.2
–0.4
–0.6
–0.8
–1.0
The AD7693 is housed in a 10-lead MSOP or a 10-lead LFCSP
with operation specified from −40°C to +85°C.
1 Protected by U.S. Patent 6,703,961.
0
65536
16384
32768
CODE
49152
Figure 1. Integral Nonlinearity vs. Code
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2006–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com