16-Bit, 8-Channel,
500 kSPS PulSAR ADC
Data Sheet
AD7699
FEATURES
FUNCTIONAL BLOCK DIAGRAM
5V
0.5V TO 4.096V
0.1µF
0.5V TO VDD
10µF
16-bit resolution with no missing codes
8-channel multiplexer with choice of inputs
Unipolar single-ended
REFIN
REF
VDD
Differential (GND sense)
Pseudo bipolar
Throughput: 500 kSPS
INL: 0.5 LSB typical, 1.5 LSB maximum ( 23 ppm or FSR)
Dynamic range: 93.3 dB
SINAD: 91.5 dB at 20 kHz
THD: −97 dB at 20 kHz
Analog input range: 0 V to VREF with VREF up to VDD
Multiple reference types
1.8V
TO
VDD
BAND GAP
VIO
REF
AD7699
TEMP
SENSOR
CNV
IN0
IN1
IN2
IN3
IN4
IN5
IN6
IN7
SCK
SDO
DIN
SPI SERIAL
INTERFACE
16-BIT SAR
ADC
MUX
ONE-POLE
LPF
SEQUENCER
COM
Internal 4.096 V
External buffered (up to 4.096 V)
External (up to VDD)
GND
Figure 1.
Internal temperature sensor
Channel sequencer, selectable 1-pole filter, busy indicator
No pipeline delay, SAR architecture
Single-supply 5 V operation with
1.8 V to 5 V logic interface
Table 1. Multichannel 14-/16-Bit PulSAR® ADC
Type
Channels 250 kSPS
500 kSPS ADC Driver
14-Bit
16-Bit
16-Bit
8
4
8
AD7949
AD7682
AD7689
ADA4841-1
ADA4841-1
ADA4841-1
Serial interface compatible with SPI, MICROWIRE,
QSPI, and DSP
AD7699
Power dissipation
26 mW at 500 kSPS
GENERAL DESCRIPTION
The AD7699 is an 8-channel, 16-bit, charge redistribution
successive approximation register (SAR) analog-to-digital
converter (ADC) that operates from a single power supply, VDD.
5.2 μW at 100 SPS
Standby current: 50 nA
20-lead 4 mm × 4 mm LFCSP package
20-lead 2.4 mm × 2.4 mm WLCSP package
The AD7699 contains all components for use in a multichannel,
low power data acquisition system, including a true 16-bit SAR
ADC with no missing codes; an 8-channel low crosstalk multip-
lexer useful for configuring the inputs as single-ended (with or
without ground sense), differential, or bipolar; an internal 4.096 V
low drift reference and buffer; a temperature sensor; a selectable
one-pole filter; and a sequencer that is useful when channels are
continuously scanned in order.
APPLICATIONS
Battery-powered equipment
Medical instruments: ECG/EKG
Mobile communications: GPS
Personal digital assistants
Power line monitoring
Data acquisition
The AD7699 uses a simple serial port interface (SPI) for writing
to the configuration register and receiving conversion results.
The SPI interface uses a separate supply, VIO, which is set to the
host logic level. Power dissipation scales with throughput.
Seismic data acquisition systems
Instrumentation
Process control
The AD7699 is housed in a tiny 20-lead LFCSP and a 20-ball
WLCSP with operation specified from −40°C to +85°C.
Rev. F
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com