5秒后页面跳转
AD7172-2BRUZ-RL PDF预览

AD7172-2BRUZ-RL

更新时间: 2024-11-05 01:06:47
品牌 Logo 应用领域
亚德诺 - ADI 光电二极管转换器
页数 文件大小 规格书
61页 1139K
描述
True rail-to-rail analog and reference input buffers

AD7172-2BRUZ-RL 数据手册

 浏览型号AD7172-2BRUZ-RL的Datasheet PDF文件第2页浏览型号AD7172-2BRUZ-RL的Datasheet PDF文件第3页浏览型号AD7172-2BRUZ-RL的Datasheet PDF文件第4页浏览型号AD7172-2BRUZ-RL的Datasheet PDF文件第5页浏览型号AD7172-2BRUZ-RL的Datasheet PDF文件第6页浏览型号AD7172-2BRUZ-RL的Datasheet PDF文件第7页 
Low Power, 24-Bit, 31.25 kSPS, Sigma-Delta  
ADC with True Rail-to-Rail Buffers  
AD7172-2  
Data Sheet  
FEATURES  
GENERAL DESCRIPTION  
Fast and flexible output rate: 1.25 SPS to 31.25 kSPS  
Channel scan data rate of 6.21 kSPS/channel (161 µs settling)  
Performance specifications  
17.2 noise free bits at 31.25 kSPS  
24 noise free bits at 5 SPS  
The AD7172-2 is an intelligent, low noise, low power, multiplexed,  
Σ-Δ analog-to-digital converter (ADC) with 2- or 4-channel  
(fully differential/single-ended) inputs for low bandwidth  
signals. The AD7172-2 has a maximum channel scan rate of  
6.21 kSPS (161 µs) for fully settled data. The output data rates  
range from 1.25 SPS to 31.25 kSPS.  
INL: 2 ppm of FSR  
85 dB rejection of 50 Hz and 60 Hz with 50 ms settling  
User configurable input channels  
2 fully differential channels or 4 single-ended channels  
Crosspoint multiplexer  
On-chip 2.5 V reference ( 2 ppm/°C drift)  
True rail-to-rail analog and reference input buffers  
Internal or external clock  
The AD7172-2 integrates key analog and digital signal condition-  
ing blocks to allow users to configure an individual setup for each  
analog input channel in use via the SPI. Integrated true rail-to-rail  
buffers on the analog inputs and external reference inputs provide  
easy to drive high impedance inputs. The precision 2.5 V low drift  
(2 ppm/°C) band gap internal reference (with an output reference  
buffer) adds embedded functionality to reduce the external  
component count.  
Power supply  
AVDD1 = 3.0 V to 5.5 V, AVDD2 = IOVDD = 2 V to 5.5 V  
Split supply with AVDD1 and AVSS at 2.5 V or 1.65 V  
ADC current: 1.5 mA  
Temperature range: −40°C to +105°C  
3- or 4-wire serial digital interface (Schmitt trigger on SCLK)  
Serial port interface (SPI), QSPI-, MICROWIRE-, and DSP-  
compatible  
The digital filter allows simultaneous 50 Hz and 60 Hz rejection  
at a 27.27 SPS output data rate. The user can switch between  
different filter options according to the demands of each channel in  
the application, with further digital processing functions such as  
offset and gain calibration registers, which are also configurable on  
a per channel basis. General-purpose inputs/outputs (GPIOs)  
control external multiplexers synchronous to the ADC conversion  
timing.  
APPLICATIONS  
Process control: PLC/DCS modules  
Temperature and pressure measurement  
Medical and scientific multichannel instrumentation  
Chromatography  
The specified operating temperature range is −40°C to +105°C.  
The AD7172-2 is in a 24-lead TSSOP package.  
Note that, throughout this data sheet, the dual function pin  
names are referenced by the relevant function only.  
FUNCTIONAL BLOCK DIAGRAM  
AVDD1 AVDD2 REGCAPA  
REF– REF+ REFOUT  
IOVDD REGCAPD  
CROSSPOINT  
MULTIPLEXER  
AVDD1  
AVSS  
1.8V  
LDO  
1.8V  
LDO  
BUFFERED  
PRECISION  
REFERENCE  
RAIL-TO-RAIL  
REFERENCE  
AIN0  
AIN1  
AIN2  
AIN3  
AIN4  
INT  
AVDD  
REF  
INPUT BUFFERS  
CS  
SCLK  
SERIAL  
DIGITAL  
FILTER  
INTERFACE  
AND CONTROL  
Σ-Δ ADC  
DIN  
DOUT/RDY  
SYNC/ERROR  
RAIL-TO-RAIL  
ANALOG INPUT  
GPIO AND  
MUX  
XTAL AND INTERNAL  
CLOCK OSCILLATOR  
CIRCUITRY  
BUFFERS  
AVSS  
I/O CONTROL  
AD7172-2  
TEMPERATURE  
SENSOR  
AVSS  
GPIO0 GPIO1  
XTAL1 XTAL2/CLKIO  
DGND  
Figure 1.  
Rev. A  
Document Feedback  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rightsof third parties that may result fromits use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks andregisteredtrademarks are the property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700 ©2014–2016 Analog Devices, Inc. All rights reserved.  
Technical Support  
www.analog.com  
 
 
 
 

AD7172-2BRUZ-RL 替代型号

型号 品牌 替代类型 描述 数据表
AD7172-2BRUZ ADI

类似代替

True rail-to-rail analog and reference input buffers

与AD7172-2BRUZ-RL相关器件

型号 品牌 获取价格 描述 数据表
AD7172-2BRUZ-RL7 ADI

获取价格

True rail-to-rail analog and reference input buffers
AD7172-4 ADI

获取价格

ADC with True Rail-to-Rail Buffers
AD7172-4_17 ADI

获取价格

ADC with True Rail-to-Rail Buffers
AD7172-4BCPZ ADI

获取价格

Low Power,  with 4- or 8-channel, 24-bit, 31.
AD7172-4BCPZ-RL ADI

获取价格

Low Power,  with 4- or 8-channel, 24-bit, 31.
AD7172-4BCPZ-RL7 ADI

获取价格

Low Power,  with 4- or 8-channel, 24-bit, 31.
AD7173-8 ADI

获取价格

Low Power, 8-/16-Channel, 31.25 kSPS, 24-Bit, Highly Integrated Sigma-Delta ADC
AD7173-8BCPZ ADI

获取价格

Low Power, 8-/16-Channel, 31.25 kSPS, 24-Bit, Highly Integrated Sigma-Delta ADC
AD7173-8BCPZ-RL ADI

获取价格

Low Power, 8-/16-Channel, 31.25 kSPS, 24-Bit, Highly Integrated Sigma-Delta ADC
AD7175-2 ADI

获取价格

24-Bit, 250 kSPS, Sigma-Delta ADC Settling and True Rail-to-Rail Buffers