24-Bit, 8-/16-Channel, 250 kSPS, Sigma-
Delta ADC with True Rail-to-Rail Buffers
AD7175-8
Data Sheet
FEATURES
GENERAL DESCRIPTION
Fast and flexible output rate: 5 SPS to 250 kSPS
The AD7175-8 is a low noise, fast settling, multiplexed, 8-/16-
Channel scan data rate of 50 kSPS/channel (20 µs settling)
Performance specifications
17.2 noise free bits at 250 kSPS
20.2 noise free bits at 2.5 kSPS
24 noise free bits at 20 SPS
INL: 1 ppm of FSR
85 dB filter rejection of 50 Hz and 60 Hz with 50 ms settling
User configurable input channels
8 fully differential channels or 16 single-ended channels
Crosspoint multiplexer
On-chip 2.5 V reference ( 2 ppm/°C drift)
True rail-to-rail analog and reference input buffers
Internal or external clock
channel (fully/pseudo differential) Σ-Δ analog-to-digital
converter (ADC) for low bandwidth inputs. It has a maximum
channel scan rate of 50 kSPS (20 µs) for fully settled data. The
output data rates range from 5 SPS to 250 kSPS.
The AD7175-8 integrates key analog and digital signal condition-
ing blocks to allow users to configure an individual setup for
each analog input channel in use. Each feature can be user selected
on a per channel basis. Integrated true rail-to-rail buffers on the
analog inputs and external reference inputs provide easy to drive
high impedance inputs. The precision 2.5 V low drift (2 ppm/°C)
band gap internal reference (with output reference buffer) adds
embedded functionality to reduce external component count.
The digital filter allows simultaneous 50 Hz and 60 Hz rejection
at a 27.27 SPS output data rate. The user can switch between
different filter options according to the demands of each channel
in the application. The ADC automatically switches through
each selected channel. Further digital processing functions
include offset and gain calibration registers, configurable on a
per channel basis.
Power supply: AVDD1 − AVSS = 5 V, AVDD2 = IOVDD = 2 V to
5 V (nominal)
Split supply with AVDD1/AVSS at 2.5 V
ADC current: 8.4 mA
Temperature range: −40°C to +105°C
3- or 4-wire serial digital interface (Schmitt trigger on SCLK)
Serial port interface (SPI), QSPI, MICROWIRE, and DSP
compatible
The device operates with a 5 V AVDD1 − AVSS supply, or with
2.5 V AVDD1/AVSS, and 2 V to 5 V AVDD2 and IOVDD
nominal supplies. The specified operating temperature range is
−40°C to +105°C. The AD7175-8 is available in a 40-lead LFCSP
package.
APPLICATIONS
Process control: PLC/DCS modules
Temperature and pressure measurement
Medical and scientific multichannel instrumentation
Chromatography
FUNCTIONAL BLOCK DIAGRAM
AVDD2 REGCAPA REF– REF+ REFOUT
AVDD1
IOVDD REGCAPD
CROSSPOINT
MULTIPLEXER
BUFFERED
PRECISION
REFERENCE
1.8V
LDO
1.8V
LDO
REFERENCE
INPUT
BUFFERS
AIN0/REF2–
AIN1/REF2+
AVDD
INT
REF
CS
SCLK
DIN
SERIAL
INTERFACE
AND CONTROL
DIGITAL
FILTER
Σ-Δ ADC
DOUT/RDY
SYNC
ERROR
AIN15
AIN16
ANALOG
INPUT
BUFFERS
AVSS
XTAL AND INTERNAL
CLOCK OSCILLATOR
CIRCUITRY
I/O AND EXTERNAL
MUX CONTROL
AD7175-8
TEMPERATURE
SENSOR
AVSS
PDSW
GPIO0GPIO1GPO2GPO3
XTAL1 XTAL2/CLKIO
DGND
Figure 1.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2015 Analog Devices, Inc. All rights reserved.
www.analog.com