NXP Semiconductors
Data Sheet: Technical Data
K22P121M100SF9
Rev. 7, 08/2016
Kinetis K22F 128KB Flash
MK22FN128VDC10
100 MHz ARM® Cortex®-M4 Based Microcontroller with FPU
MK22FN128VLL10
MK22FN128VMP10
MK22FN128VLH10
The Kinetis K22 product family members are optimized for cost-
sensitive applications requiring low-power, USB connectivity,
high peripheral integration and processing efficiency with a
floating-point unit. These devices share the comprehensive
enablement and scalability of the Kinetis family.
This product offers:
121 XFBGA (DC)
100 LQFP (LL)
8 x 8 x 0.5 Pitch 0.65 14 x 14 x 1.4 Pitch 0.5
• Run power consumption down to 120 μA/MHz. Static
power consumption down to 2.6 μA with full state retention
and 6 μs wakeup. Lowest static mode down to 120 nA.
• USB LS/FS OTG 2.0 with embedded 3.3 V, USB FS device
crystal-less functionality.
mm
mm
64 MAPBGA (MP)
64 LQFP (LH)
5 x 5 x 1.2 Pitch 0.5 10 x 10 x 1.4 Pitch 0.5
mm mm
Performance
• 100 MHz ARM Cortex-M4 core with DSP instructions
Analog modules
• Two 16-bit SAR ADCs (1.2 MS/s in 12bit mode)
• One 12-bit DAC
delivering 1.25 Dhrystone MIPS per MHz
• Two analog comparators (CMP) with 6-bit DAC
• Accurate internal voltage reference
Memories and memory interfaces
• 128 KB of embedded flash and 24 KB of RAM
• Serial programming interface(EzPort)
• Pre-programmed Kinetis flashloader for one-time, in-
system factory programming
Communication interfaces
• USB LS/FS OTG 2.0 with on-chip transceiver
• USB full-speed device crystal-less operation
• Two SPI modules
System peripherals
• Three UART modules and one low-power UART
• Two I2C: Support for up to 1 Mbps operation
• I2S module
• Flexible low-power modes, multiple wakeup sources
• 4-channel DMA controller
• Independent External and Software Watchdog monitor
Timers
Clocks
• One 8-channel general-purpose/PWM timer
• Two 2-channel general-purpose timers with
quadrature decoder functionality
• Periodic interrupt timers
• Two crystal oscillators: 32 kHz (RTC) and 32-40 kHz or
3-32 MHz
• Three internal oscillators: 32 kHz, 4 MHz, and 48 MHz
• Multi-purpose clock generator with FLL
• 16-bit low-power timer
• Real-time clock with independent power domain
• Programmable delay block
Security and integrity modules
• Hardware CRC module
• 128-bit unique identification (ID) number per chip
• Flash access control to protect proprietary software
Operating Characteristics
• Voltage range (including flash writes): 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105°C
Human-machine interface
• Up to 67 general-purpose I/O (GPIO)
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.