A Product Line of
Diodes Incorporated
ZXGD3005E6
25V 10A GATE DRIVER IN SOT26
Features and Benefits
Description and Applications
The ZXGD3005E6 is a high-speed non-inverting single gate driver
capable of driving up to 10A into a MOSFET or IGBT gate capacitive
load from supply voltages up to 25V. With propagation delay times
down to <10ns and correspondingly rise/fall times of <20ns.
•
Emitter-follower configuration for ultra-fast switching
•
•
<10ns propagation delay time
<20ns rise/fall time
•
•
•
•
•
Non-inverting voltage buffer stage
Wide supply voltage up to 25V to minimize on-losses
10A peak current drive into capacitive loads
Low input current of 1mA to deliver 4A output current
Separate source and sink outputs for independent control of rise
and fall time
Optimized pin-out to ease board layout and minimize parasitic
inductance of traces
Rugged design that avoids latch-up or shoot-through issues
Near - Zero quiescent supply current
This gate driver ensures rapid switching of the MOSFET or IGBT to
minimize power losses and distortion in high current switching
applications. It is ideally suited to act as a voltage buffer between the
typically high output impedances of a controller IC and the effectively
low impedance on the gate of a power MOSFET or IGBT during
switching. Its low input voltage requirement and high current gain
allows high current driving from low voltage controller ICs.
•
•
•
•
•
•
The ZXGD3005E6 has separate source and sink outputs that enables
the turn-on and turn-off times of the MOSFET or IGBT to be
independently controlled. In addition, the wide supply voltage range
allows full enhancement of the MOSFET or IGBT to minimize on-state
losses and permits +15V to -5V gate drive voltage to prevent dV/dt
induced false triggering of IGBTs. The ZXGD3005E6 has been
designed to be inherently rugged to latch-up and shoot-through
issues. The optimized pin-out SOT26 package eases board layout,
enabling reduced parasitic inductance of traces.
“Lead-Free”, RoHS Compliant (Note 1)
“Green” Devices (Note 2)
Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
•
•
•
•
•
•
Case: SOT26
Power MOSFET and IGBT Gate Driving in:
Case material: Molded Plastic. “Green” Molding Compound.
UL Flammability Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Matte Tin Finish
•
•
•
•
•
•
•
Synchronous switch-mode power supplies
Power Factor Correction (PFC) in power supplies
Secondary side synchronous rectification
Plasma Display Panel power modules
1, 2 and 3-phase motor control circuits
Audio switching amplifier power output stages
Solar inverters
Weight: 0.018 grams (approximate)
Pin Name
VCC
Pin Function
Supply voltage high
Driver input pin
SOT26
VCC
IN
Source
IN
Do Not Connect
Sink
1
Supply voltage low
Source current output
Sink current output
VEE
VEE
SOURCE
SINK
Top View
Pin-Out
Top View
Ordering Information (Note 3)
Product
ZXGD3005E6TA
Marking
3005
Reel size (inches)
Tape width (mm)
Quantity per reel
3000
7
8
Notes:
1. No purposefully added lead
2. “Green” devices, Halogen and Antimony Free, Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com
3. For packaging details, go to our website at http://www.diodes.com
Marking Information
3005 = Product Type Marking Code
3005
1 of 8
www.diodes.com
March 2011
© Diodes Incorporated
ZXGD3005E6
Document Number DS35095 Rev. 4 – 2