ZXGD3009E6
40V 1A GATE DRIVER IN SOT26
Description
Features
ZXGD3009E6 is a high-speed non-inverting single gate driver for
switching MOSFETs. It can transfer up to 1A peak source/sink current
into the gate for effective charging and discharging the capacitive gate
load.
•
•
•
•
High-Gain Buffer With Typically 500mA Output from 10mA Input
Rugged Emitter-Follower to Latch-up/Shoot-Through Issues
Wide Supply Voltage to Minimize On-Losses
Optimized Pin-Out to Simplify PCB Layout and Reduce
Parasitic Trace Inductances
This gate driver ensures rapid switching of the MOSFET to minimize
power losses and distortion in high current switching applications. It
can typically drive 500mA into the low gate impedance with just 10mA
input from a controller. The turn-on and turn-off switching behavior of
the MOSFET can be individually tailored to suit an application. By
defining the switching characteristics appropriately, EMI and cross
conduction can be reduced.
•
•
•
•
Near-Zero Quiescent Supply Current
Qualified to AEC-Q101 Standards for High Reliability
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Applications
Mechanical Data
Power MOSFET Gate Driving in:
•
•
Case: SOT26
•
•
•
•
•
AC-DC Power Supplies (SMPS)
DC-DC Converters
Case Material: Molded Plastic. “Green” Molding Compound
UL Flammability Rating 94V-0
DC-AC Inverters (i.e. Solar)
1-, 2-, and 3-Phase Motor Control Circuits
Amplifier Output Stages
•
•
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish—Matte Tin Plated Leads. Solderable per
MIL-STD-202, Method 208
•
Weight: 0.018 grams (Approximate)
SOT26
Pin Name
VCC
Pin Function
Supply Voltage High
Driver Input
VCC
IN
SOURCE
Not Internally
Connected
IN
Supply Voltage Low
Source Current Output *
Sink Current Output *
VEE
SINK
VEE
SOURCE
SINK
Top View
Pin-Out
* Typically connect SOURCE & SINK together
Internal Device
Schematic
Top View
Ordering Information (Note 4)
Product
Compliance
Marking
Reel Size (inches)
Tape Width (mm)
Quantity per Reel
ZXGD3009E6TA
AEC-Q101
3009
7
8
3000
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
1 of 8
www.diodes.com
July 2018
© Diodes Incorporated
ZXGD3009E6
Datasheet Number: DS36885 Rev. 3 - 2