XR16V2651
HIGH PERFORMANCE DUART WITH 32-BYTE FIFO AND POWERSAVE
MAY 2007
REV. 1.0.2
FEATURES
GENERAL DESCRIPTION
• 2.25 to 3.6 Volt Operation
• 5 Volt Tolerant Inputs
1
The XR16V2651 (V2651) is a high performance dual
universal asynchronous receiver and transmitter
(UART) with 32 byte TX and RX FIFOs. The device
operates from 2.25 to 3.6 volts with 5 Volt tolerant
inputs and is pin-to-pin and software compatible to
Exar’s XR16V2551 and XR16L2551. The device
• Pin-to-pin compatible to Exar’s XR16L2751 in the
48-TQFP package
• Two independent UART channels
■ Register set identical to 16V2650
includes
2
additional capabilities over the
XR16V2650: Intel and Motorola data bus selection
and a “PowerSave” mode to further reduce sleep
current to a minimum during sleep mode. It supports
the Exar’s enhanced features of selectable FIFO
trigger level, automatic hardware (RTS/CTS) and
software flow control, and a complete modem
interface. An internal loopback capability allows
system diagnostics. Independent programmable
fractional baud rate generators are provided in each
channel to select data rates up to 16 Mbps at 3.3 Volt
and 4X sampling clock. The V2651 is available in 48-
pin TQFP and 32-pin QFN packages.
■ Data rate of up to 16 Mbps at 3.3 V, and 12.5
Mbps at 2.5 V with 4X sampling rate
■ Fractional Baud Rate Generator
■ Transmit and Receive FIFOs of 32 bytes
■ Selectable TX and RX FIFO Trigger Levels
■ Automatic Hardware (RTS/CTS) Flow Control
■ Automatic Software (Xon/Xoff) Flow Control
■ Wireless Infrared (IrDA 1.0) Encoder/Decoder
■ Automatic sleep mode with wake-up interrupt
■ Full modem interface
NOTE: 1 Covered by U.S. Patent #5,649,122
• PowerSave Feature reduces sleep current to 15 µA
• Device Identification and Revision
APPLICATIONS
• Portable Appliances
• Crystal oscillator (up to 32MHz) or external clock
(up to 64MHz) input
• Telecommunication Network Routers
• Ethernet Network Routers
• 48-TQFP and 32-QFN packages
• Cellular Data Devices
• Factory Automation and Process Controls
FIGURE 1. XR16V2651 BLOCK DIAGRAM
*5 Volt Tolerant Inputs
2.25 to 3.6V VCC
GND
PwrSave
A2:A0
D7:D0
UART Channel A
32 Byte TX FIFO
IOR# (VCC)
IOW# (R/W#)
CSA# (CS#)
TXA, RXA, DTRA#,
DSRA#, RTSA#,
DTSA#, CDA#, RIA#,
OP2A#
UART
Regs
IR
ENDEC
TX & RX
CSB# (A3)
BRG
INTA (IRQ#)
32 Byte RX FIFO
INTB (logic 0)
TXB, RXB, DTRB#,
DSRB#, RTSB#,
CTSB#, CDB#, RIB#,
OP2B#
TXRDYA#
TXRDYB#
RXRDYA#
RXRDYB#
UART Channel B
(same as Channel A)
Intel or
Motorola
Data Bus
Interface
XTAL1
XTAL2
Reset (Reset#)
16/68#
Crystal Osc/Buffer
CLKSEL
Exar Corporation 48720 Kato Road, Fremont CA, 94538 • (510) 668-7000 • FAX (510) 668-7017 • www.exar.com