XR16V2652
HIGH PERFORMANCE DUART WITH 32-BYTE FIFO
MAY 2007
REV. 1.0.2
FEATURES
GENERAL DESCRIPTION
• 2.25 to 3.6 Volt Operation
• 5 Volt Tolerant Inputs
1
The XR16V2652 (V2652) is a high performance dual
universal asynchronous receiver and transmitter
(UART) with 32 byte TX and RX FIFOs. The device
operates from 2.25 to 3.6 volts with 5 Volt tolerant
inputs and is pin-to-pin compatible to Exar’s
• Pin-to-pin compatible to Exar’s XR16V2752 in the
44-PLCC package
ST16C2552,
XR16L2552,
XR16V2552
and
• Two independent UART channels
XR16L2752. The V2652 register set is compatible to
the ST16C2552 and the XR16V2552. It supports the
Exar’s enhanced features of selectable FIFO trigger
level, automatic hardware (RTS/CTS) and software
flow control and a complete modem interface.
Onboard registers provide the user with operational
status and data error flags. An internal loopback
capability allows system diagnostics. Independent
programmable baud rate generators are provided in
each channel to select data rates up to 16 Mbps at
3.3 Volt with 4X sampling clock. The V2652 is
available in 44-pin PLCC and 32-pin QFN packages.
■ Register set compatible to ST16C2552
■ Data rate of up to 16 Mbps at 3.3 V and
12.5 Mbps at 2.5 V with 4X sampling rate
■ Fractional Baud Rate Generator
■ Transmit and Receive FIFOs of 32 bytes
■ Selectable TX and RX FIFO Trigger Levels
■ Automatic Hardware (RTS/CTS) Flow Control
■ Automatic Software (Xon/Xoff) Flow Control
■ Wireless Infrared (IrDA 1.0) Encoder/Decoder
■ Automatic sleep mode
NOTE: 1 Covered by U.S. Patent #5,649,122
■ Full modem interface
APPLICATIONS
• Alternate Function Register
• Portable Appliances
• Device Identification and Revision
• Crystal oscillator or external clock input
• Telecommunication Network Routers
• Ethernet Network Routers
• Crystal oscillator (up to 32 MHz) or external clock
(up to 64 MHz) input
• Cellular Data Devices
• 44-PLCC and 32-QFN packages
• Factory Automation and Process Controls
FIGURE 1. XR16V2652 BLOCK DIAGRAM
* 5 Volt Tolerant Inputs
2.25 to 3.6 Volt VCC
A2:A0
D7:D0
GND
IOR#
IOW#
UART Channel A
TXA, RXA, DTRA#,
32 Byte TX FIFO
CS#
UART
Regs
DSRA#, RTSA#,
DTSA#, CDA#, RIA#,
OP2A#
IR
ENDEC
CHSEL
TX & RX
8-bit Data
Bus
Interface
INTA
INTB
BRG
32 Byte RX FIFO
TXRDYA#
TXRDYB#
RXRDYA#
RXRDYB#
TXB, RXB, DTRB#,
DSRB#, RTSB#,
CTSB#, CDB#, RIB#,
OP2B#
UART Channel B
(same as Channel A)
Reset
XTAL1
XTAL2
Crystal Osc/Buffer
Exar Corporation 48720 Kato Road, Fremont CA, 94538 • (510) 668-7000 • FAX (510) 668-7017 • www.exar.com