uP9617
1MHz, 2.0A, High-Efficiency
Synchronous-Rectified Buck Converter
Features
General Description
The uP9617 is a high efficiency synchronous-rectified buck
converter with internal power switches. Fixed 1MHz PWM
operation allows possible smallest output ripple and
external component size. With high conversion efficiency
and small package, the uP9617 is ideally suitable for
portable devices and USB/PCIE-based interface cards
where PCB area is especially concerned.
2.6V to 5.5V Input Voltage Range
Adjustable Output from 0.6V to VIN
Guaranteed 2.0A Output Current
+
Accurate Reference: 0.6V ( 1.5%)
Up to 95% Conversion Efficiency
Low Quiescent Current
Integrated Low RDS(ON) Upper and Lower
MOSFET Switches: 100mΩ and 85mΩ
With internal low RDS(ON) switches, the uP9617 is capable
of delivering 2.0A output current over a wide input voltage
range from 2.6V to 5.5V. The output voltage is adjustable
from 0.6V to VIN by a voltage divider. Other features include
internal soft-start, chip enable, over-voltage, under-
voltage, over-temperature and over-current protections.
The uP9617 is available in a space-saving WQFN3x3-16L
package.
Current Mode PWM Operation
Fixed Frequency: 1MHz
100% Maximum Duty Cycle for Lowest Dropout
Internal Soft-Start
No Schottky Diode Required
Over-Voltage and Under-Voltage Protection
Over-Temperature and Over-Current Protection
WQFN3x3-16L Package
Applications
Battery-Powered Portable Devices
MP3 Players
RoHS Compliant and Halogen Free
Digital Still Cameras
Wireless and DSL Modems
Personal Information Appliances
802.11 WLAN Power Supplies
FPGA/ASIC Power Supplies
Ordering Information
Order Number
Package Type
WQFN3x3-16L
Top Marking
uP9617P
uP9617PQDD
Note:
Dynamically Adjustable Power Supply for
CDMA/WCSMA Power Amplifiers
(1) Please check the sample/production availability with
uPI representatives.
USB-Based xDSL Modems and Other Network
Interface Cards
(2) uPI products are compatible with the current IPC/JEDEC
J-STD-020 requirement. They are halogen-free, RoHS
compliant and 100% matte tin (Sn) plating that are suitable
for use in SnPb or Pb-free soldering processes.
Point-of-Load Regulation
Pin Configuration
PGND
PGND
PGND
FB
VIN
VIN
VIN
VCC
1
2
3
4
12
11
10
9
WQFN3x3-16L
uP9617-DS-F00A0, May 2018
www.upi-semi.com
1