TPS658610A
www.ti.com
SLVSAH3–AUGUST 2010
Advanced Power Management Unit
Check for Samples: TPS658610A
1 Introduction
1.1 Main Features
1
• BATTERY CHARGER
• SYSTEM MANAGEMENT
– Dual Input Power Path
– Complete Charge Management Solution for a
Single Cell Li-Ion/Li-Pol Cell With Dynamic
Power Management and Thermal Foldback.
– Maximum 1.0A charge current
– Programmable Adapter and USB Charge
Operation
•
•
USB Current Limiting
Max 18V Over-Voltage Protection
– Power Good Monitoring on all Supply
Outputs
– Software Reset Function
– Hardware On/Off and Reboot Control
– 11 Channel ADC With 3 Operating Modes
• INTEGRATED POWER SUPPLIES
– 3 Programmable Step-Down converters
•
Software Controlled Enable/Forced PWM
Mode
•
•
•
Single Conversion
Peak Detection
Averaging
•
•
Automatic Power Saving Mode
Maximum 1.2A Outputs
– 11 Programmable General Purpose LDOs
1.2 Applications
•
•
7 With Output Voltages of 1.25V to 3.3V
2 With Output Voltages of 0.725V to 1.5V
or 1.25V to 2.586V (factory configurable)
•
•
•
Smart Phones
Portable Navigation Devices
Portable Media Players
•
1 “Always On” With Output Voltages of
1.25V to 3.3V
•
1 With Output Voltage of 1.70V–2.475V
• DISPLAY SUPPORT FUNCTIONS
– 4 PWM Outputs With Programmable
Frequency and Duty Cycle
– Dual RGB LED Drivers
– Constant Current WLED Driver
•
•
•
26.5V (max) at 25mA
Over-Voltage Protection
Programmable Current Level and
Brightness Control
• HOST INTERFACE
– Interrupt Controller With Maskable Interrupts
– External ADC Triggering and Step-Down
Converter Mode Control
1.3 Overview
The TPS658610A provides an easy to use, fully integrated solution for handheld devices, integrating
charge management, multiple regulated power supplies, system management and display functions in a
small 6x6 package. The I2C interface enables control of a wide range of subsystem parameters. Internal
registers have a complete set of status information, enabling easy diagnostics and host-controlled
handling of fault conditions.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated