TPS658622B
www.ti.com
SLVSAJ8–SEPTEMBER 2010
Advanced Power Management Unit
Check for Samples: TPS658622B
1 Introduction
1.1 Main Features
1
• BATTERY CHARGER
• SYSTEM MANAGEMENT
– Dual-Input Power Path
– Complete Charge Management Solution for a
Single-Cell Li-Ion/Li-Pol Cell With Dynamic
Power Management and Thermal Foldback
– Maximum 1-A Charge Current
– Programmable Adapter and USB Charge
Operation
•
•
USB Current Limiting
Max. 18-V Overvoltage Protection
– Power-Good Monitoring on All Supply
Outputs
– Software Reset Function
– Hardware On/Off and Reboot Control
– Momentary Power Loss (MPL) Handling
– AUTOBOOT Feature
• INTEGRATED POWER SUPPLIES
– 3 Programmable Step-Down Converters
•
Software-Controlled Enable/Forced PWM
Mode
– 11-Channel ADC With 3 Operating Modes
•
•
•
Automatic Power-Saving Mode
Maximum 1.5-A Outputs (SM0, SM2)
Maximum 2-A Output (SM1)
•
•
•
Single Conversion
Peak Detection
Averaging
– 11 Programmable General-Purpose LDOs
•
•
7 With Output Voltages of 1.25 V to 3.3 V
1.2 Applications
2 With Output Voltages of 0.725 V to 1.5 V
or 1.25 V to 2.586 V (Factory
Configurable)
1 Always On With Output Voltages of
1.25 V to 3.3 V
•
•
•
Smart Phones
Portable Navigation Devices
Portable Media Players
•
•
1 With Output Voltage of 1.7 V to 2.475 V
• DISPLAY SUPPORT FUNCTIONS
– 4 PWM Outputs With Programmable
Frequency and Duty Cycle
– Dual RGB LED Drivers
– Constant-Current WLED Driver
•
•
•
26.5 V (Max.) at 25 mA
Overvoltage Protection
Programmable Current-Level and
Brightness Control
• HOST INTERFACE
– Interrupt Controller With Maskable Interrupts
– External ADC Triggering and Step-Down
Converter Mode Control
1.3 Overview
The TPS658622B provides an easy-to-use, fully integrated solution for handheld devices, integrating
charge management, multiple regulated power supplies, system management, and display functions in a
small 6-mm × 6-mm package. The I2C interface enables control of a wide range of subsystem parameters.
Internal registers have a complete set of status information, enabling easy diagnostics and host-controlled
handling of fault conditions.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated