TPS657052
TPS657051
www.ti.com
SLVSA08 –FEBRUARY 2010
PMU for Embedded Camera Module
Check for Samples: TPS657052, TPS657051
1
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Two 400mA Step-Down Converters
DESCRIPTION
Up to 92% Efficiency
TPS657051/52 are small power management units
targeted for embedded camera module or other
portable low power consumer end equipments. It
contains two high efficient step down converters, a
low dropout linear regulator and additional supporting
functions. The 2.25MHz step-down converter enters a
low power mode at light load for maximum efficiency
across the widest possible range of load currents. For
low noise applications the devices can be forced into
fixed frequency PWM mode using the MODE pin. The
device allows the use of small inductors and
VIN Range for DCDC Converter From 3.3V to 6V
2.25 MHz Fixed Frequency Operation
Power Save Mode at Light Load Current
Output Voltage Accuracy in PWM Mode ±1.5%
100% Duty Cycle for Lowest Dropout
180° Out of Phase Operation
1 General Purpose 200mA LDO
VIN Range for LDO From 1.7V to 6.0V
Available in a 16 Ball WCSP With 0.5mm Pitch
capacitors to achieve
a
small sized solution.
TPS657051/52 provides an output current of up to
400mA on both DCDC converters and integrates one
200mA LDO with different output settings. The LDO
operates with an input voltage range between 1.7V
and 6.0V allowing it to be supplied from the output of
the step-down converter or directly from the system
voltage.
APPLICATIONS
•
•
•
Digital Cameras
Portable Media Players
Handheld Equipment
VCC
TPS657051/52
The TPS657051/52 comes in a small 16-ball wafer
chip scale package (WCSP) with 0.5mm ball pitch.
2.2 μH
L1
VIN1
Vout1
Vout2
Vout3
DCDC1
400 mA
MODE
EN1
10 mF
FB1
10uF
PGND
CLK0°
2.25 MHz
Oscillator
CLK180°
2.2 μH
FB2
L2
VIN2
EN2
DCDC2
400 mA
10 mF
PGND
VLDO
VINLDO
ENLDO
2.2 mF
LDO
200 mA
AGND
Figure 1. Application Circuit
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated