TPS65720
TPS65721
www.ti.com
SLVS979 –OCTOBER 2009
PMU for Bluetooth Headsets
Check for Samples: TPS65720 TPS65721
1
FEATURES
DESCRIPTION
2
•
Battery Charger With Power Path Management
•
28 V Rated Power Path With:
The TPS65720 is a small power management unit
targeted for Bluetooth headsets or other portable low
power consumer end equipments. It contains an USB
friendly Lithium-Ion battery charger, a high efficient
step down converter, a low dropout linear regulator
and additional supporting functions. The device is
controlled by an I2C interface. Several settings can
be customized by the use of non volatile memory
which is factory programmed. The 2.25MHz
step-down converter enters a low power mode at light
load for maximum efficiency across the widest
possible range of load currents. For low noise
applications the devices can be forced into fixed
frequency PWM mode using the I2C compatible
interface. The device allows the use of small
inductors and capacitors to achieve a small solution
size. TPS65720 provides an output current of up to
200mA on the DCDC converter. The TPS65720 also
integrates one 200mA LDO. The LDO operates with
an input voltage range between 1.8V and 5.6V
allowing it to be supplied from the output of the
step-down converter or directly from the system
voltage.
–
–
100 mA Input Current Limit
500 mA input Current Limit
•
•
•
•
•
300 mA Charge Current
200 mA Step-Down Converter for TPS65720
400 mA Step-Down Converter for TPS65721
Up to 92% Efficiency
VIN Range for DCDC Converter From 2.3V to
5.6V
•
•
•
•
•
•
•
•
•
2.25 MHz Fixed Frequency Operation
Power Save Mode at Light Load Current
Output Voltage Accuracy in PWM Mode ±2%
100% Duty Cycle for Lowest Dropout
1 General Purpose 200mA LDO
VIN Range for LDO From 1.8V to 5.6V
I2C Compatible Interface
4GPIOs
Available in a 25 Ball WCSP With 0,4mm Pitch
and in 4mm × 4mm 32-Pin QFN Package
The TPS65720 comes in a small 25-ball wafer chip
scale package (WCSP) with 0,4mm ball pitch or a
4mm × 4mm QFN package with a 0,4mm pitch
(TPS65721).
APPLICATIONS
•
Bluetooth Headsets
•
Handheld Equipment
TPS65720
BAT
AC
BAT
1uF
10k
LiIon
TS
charger / power path
NTC
ISET
R5
SYS
SYS
3k
a charge
current of150mA
4.7uF / 6.3V
for
2.2uH
VDCDC1=2.05
V
L1
R1
360k
FB_DCDC1
DCDC1
200mA
4.7uF
22pF
R2
150k
bluetooth chip
VINLDO1
2.2uF
VLDO1 = 1.85V
LDO1
200mA
VLDO1
Vin
4.7uF / 4V
2 x 100k
2 x 3.3k
RESET
INT
reset
generator
Reset
INT
/
startup logic
SYS
R6
HOLD_LDO1
GPIO
PB_IN
HOLD_DCDC1
ON /
OFF
SCLK
SDAT
SCLK
SDAT
I2C interface
PGND
AGND
GPIO0
GPIO1
GPIO or
5mA current
sink
GPIO2
GPIO3
to SYS or VDCDC1
depending on LED
forward voltage
indication LEDs
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated