TPS2060
TPS2064
DGN−8
www.ti.com
SLVS553A–MARCH 2005–REVISED JULY 2005
CURRENT-LIMITED, POWER-DISTRIBUTION SWITCHES
FEATURES
APPLICATIONS
•
Heavy Capacitive Loads
•
•
•
•
•
•
•
•
•
•
•
•
•
•
70-mΩ High-Side MOSFET
•
Short-Circuit Protections
1.5-A Continuous Current
TPS2060
DGN PACKAGE
(TOP VIEW)
TPS2064
DGN PACKAGE
(TOP VIEW)
Thermal and Short-Circuit Protection
Accurate Current Limit (1.6 A min, 2.6 A max)
Operating Range: 2.7 V to 5.5 V
0.6-ms Typical Rise Time
1
2
3
4
8
7
6
5
1
2
3
4
8
7
6
5
GND
IN
EN1
EN2
OC1
GND
IN
EN1
OC1
OUT1
OUT2
OC2
OUT1
OUT2
OC2
EN2
Undervoltage Lockout
Deglitched Fault Report (OC)
No OC Glitch During Power Up
1-µA Maximum Standby Supply Current
Bidirectional Switch
Ambient Temperature Range: 0°C to 70°C
ESD Protection
UL Listed - File No. E169910
DESCRIPTION
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and
short-circuits are likely to be encountered. This device incorporates 70-mΩ N-channel MOSFET power switches
for power-distribution systems that require multiple power switches in a single package. Each switch is controlled
by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch
rise times and fall times to minimize current surges during switching. The charge pump requires no external
components and allows operation from supplies as low as 2.7 V.
When the output load exceeds the current-limit threshold or a short is present, the device limits the output current
to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When
continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction
temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal
shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains
off until valid input voltage is present. This power-distribution switch is designed to set current limit at 2.1 A
typically.
GENERAL SWITCH CATALOG
TPS2042B 500 mA
TPS2052B 500 mA
80 mΩ, dual
80 mΩ, triple
80 mΩ, quad
80 mΩ, quad
80 mΩ, dual
33 mΩ, single
80 mΩ, single
TPS201xA 0.2 A − 2 A
TPS2046
TPS2056
TPS2062
TPS2066
TPS2060
TPS2064
250 mA
250 mA
1 A
1 A
1.5 A
1.5 A
TPS202x
0.2 A − 2 A
TPS203x
0.2 A − 2 A
TPS2014
TPS2015
600 mA
1 A
TPS2080
TPS2081
TPS2082
TPS2090
TPS2091
TPS2092
500 mA TPS2043 500 mA
500 mA TPS2053B 500 mA
500 mA TPS2047 250 mA
250 mA TPS2057 250 mA
TPS2041B 500 mA
TPS2051B 500 mA
TPS2100/1
TPS2085
500 mA
500 mA
500 mA
250 mA
260 mΩ
TPS2044B 500 mA
TPS2054B 500 mA
TPS2048 250 mA
TPS2058 250 mA
IN1 500 mA
IN2 10 mA
TPS2086
TPS2087
TPS2095
TPS2045
TPS2055
TPS2061
TPS2065
250 mA
250 mA
1 A
IN1
IN2
TPS2063 1 A
TPS2067 1 A
250 mA
250 mA
OUT
TPS2102/3/4/5
IN1 500 mA
IN2 100 mA
TPS2096 250 mA
TPS2097 250 mA
1 A
1.3 Ω
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.