TPS20xxC
www.ti.com
SLVSAU6A –JUNE 2011–REVISED JULY 2011
Current-Limited, Power-Distribution Switches
Check for Samples: TPS20xxC
1
FEATURES
DESCRIPTION
The TPS20xxC power-distribution switch family is
intended for applications such as USB where heavy
capacitive loads and short-circuits are likely to be
encountered. This family offers multiple devices with
fixed current-limit thresholds for applications between
0.5 A and 2 A.
23
•
Single Power Switch Family
•
Pin for Pin with Existing TI Switch Portfolio
Rated currents of 0.5 A, 1 A, 1.5 A, 2 A
±20% Accurate, Fixed, Constant Current Limit
Fast Over-Current Response – 2 µs
Deglitched Fault Reporting
•
•
•
•
•
•
•
•
The TPS20xxC family limits the output current to a
safe level by operating in a constant-current mode
when the output load exceeds the current-limit
threshold. This provides a predictable fault current
under all conditions. The fast overload response time
eases the burden on the main 5 V supply to provide
regulated power when the output is shorted. The
power-switch rise and fall times are controlled to
minimize current surges during turn-on and turn-off.
Output Discharge When Disabled
Reverse Current Blocking
Built-in Softstart
Ambient Temperature Range: –40°C to 85°C
APPLICATIONS
•
•
•
•
USB Ports/Hubs, Laptops, Desktops
High-Definition Digital TVs
Set Top Boxes
DGN
(Top View)
DBV
(Top View)
8
7
6
5
GND
IN
IN
1
2
3
4
OUT
OUT
OUT
FLT
OUT
1
5
IN
Short-Circuit Protection
GND
FLT
2
3
EN or EN
4
EN or EN
TYPICAL APPLICATION
VIN
RFLT
10 kW
IN
VOUT
OUT
150 mF
GND
Pad*
Fault Signal
FLT
EN or
EN
Control Signal
* DGN only
Figure 1. Typical Application
Table 1. DEVICES(1)
STATUS
MAXIMUM OPERATING
DEVICES
MSOP-8
(PowerPad) ™
CURRENT
SOT23-5
0.5
1
TPS2051C
TPS2065C
-
Preview
Active
Active
Active
Preview
1.5
2
TPS2069C
-
-
TPS2000C / 1C
(1) For more details, see the DEVICE INFORMATION table.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
2
3
is a trademark of ~ Texas Instruments.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated