TPIC0107B
PWM CONTROL INTELLIGENT H-BRIDGE
SLIS067 – NOVEMBER 1998
DWP PACKAGE
(TOP VIEW)
Dedicated PWM Input Port
Optimized for Reversible Operation of
Motors
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
GNDS
GNDS
Two Input Control Lines for Reduced
Microcontroller Overhead
V
V
CC
DIR
CC
STATUS2
V
V
Internal Current Shutdown of 5 A
40 V Load Dump Rating
CC
OUT1
CC
OUT2
OUT2
GND
OUT1
GND
Integrated Fault Protection and Diagnostics
CMOS Compatible Schmitt Trigger Inputs
for High Noise Immunity
PWM
GND
STATUS1
GND
GNDS
GNDS
description
The TPIC0107B is a PWM control intelligent H-bridge designed specifically for dc motor applications. The
device provides forward, reverse, and brake modes of operation. A logic supply voltage of 5 V is internally
derived from V
.
CC
The TPIC0107B has an extremely low r
, 280 mΩ typical, to minimize system power dissipation. The
DS(on)
direction control (DIR) and PWM control (PWM) inputs greatly simplify the microcontroller overhead
requirement. The PWM input can be driven from a dedicated PWM port while the DIR input is driven as a simple
low speed toggle.
The TPIC0107B provides protection against over-voltage, over-current, over-temperature, and cross
conduction faults. Fault diagnostics can be obtained by monitoring the STATUS1 and STATUS2 terminals and
the two input control lines. STATUS1 is an open-drain output suitable for wired-or connection. STATUS2 is a
push-pull output that provides a latched status output. Under-voltage protection ensures that the outputs, OUT1
and OUT2, will be disabled when V
is less than the under-voltage detection voltage V
.
CC
(UVCC)
The TPIC0107B is designed using TI’s LinBiCMOS process. LinBiCMOS allows the integration of low power
CMOS structures, precision bipolar cells, and low impedance DMOS transistors.
The TPIC0107B is offered in a 20-pin thermally enhanced small-outline package (DWP) and is characterized
for operation over the operating case temperature of –40°C to 125°C.
FUNCTION TABLE
DIR
0
PWM
OUT1
HS
OUT2
HS
MODE
0
1
0
1
Brake, both HSDs turned on hard
Motor turns counter clockwise
Brake, both HSDs turned on hard
Motor turns clockwise
0
HS
LS
1
HS
HS
1
LS
HS
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinBiCMOS is a trademark of Texas Instruments Incorporated.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265