TPA2000D2
www.ti.com
SLOS291F–MARCH 2000–REVISED MARCH 2007
2-W FILTERLESS STEREO CLASS-D AUDIO POWER AMPLIFIER
FEATURES
•
Short-Circuit Protection (Short to Battery,
Ground, and Load)
•
Modulation Scheme Optimized to Operate
Without a Filter
•
-40°C to 85°C Operating Temperature Range
•
•
•
2 W Into 3-Ω Speakers (THD+N< 0.4%)
PW OR PWP PACKAGE
(TOP VIEW)
< 0.08% THD+N at 1 W, 1 kHz, Into 4-Ω Load
Extremely Efficient Third Generation 5-V
Class-D Technology:
1
24
23
22
21
20
19
18
17
16
15
14
13
PGND
LOUTN
GAIN0
PGND
LOUTP
BYPASS
PV
DD
LINP
2
–
–
–
–
–
–
–
–
Low Supply Current (No Filter) . . . 8 mA
Low Supply Current (Filter) . . . 15 mA
Low Shutdown Current . . . 1 µA
Low Noise Floor . . . 56 µVRMS
3
4
PV
DD
5
LINN
AGND
COSC
RINN
6
V
DD
7
ROSC
RINP
PV
DD
GAIN1
ROUTP
PGND
Maximum Efficiency Into 3 Ω, 65-70%
Maximum Efficiency Into 8 Ω, 75-85%
4 Internal Gain Settings . . . 8-23.5 dB
PSRR . . . -77 dB
8
9
PV
DD
10
11
12
SHUTDOWN
ROUTN
PGND
•
Integrated Depop Circuitry
DESCRIPTION
The TPA2000D2 is the third generation 5-V class-D amplifier from Texas Instruments. Improvements to previous
generation devices include: lower supply current, lower noise floor, better efficiency, four different gain settings,
smaller packaging, and fewer external components. The most significant advancement with this device is its
modulation scheme that allows the amplifier to operate without the output filter. Eliminating the output filter saves
the user approximately 30% in system cost and 75% in PCB area.
The TPA2000D2 is a monolithic class-D power IC stereo audio amplifier, using the high switching speed of
power MOSFET transistors. These transistors reproduce the analog signal through high-frequency switching of
the output stage. The TPA2000D2 is configured as a bridge-tied load (BTL) amplifier capable of delivering
greater than 2 W of continuous average power into a 3-Ω load at less than 1% THD+N from a 5-V power supply
in the high fidelity range (20 Hz to 20 kHz). With 1 W being delivered to a 4-Ω load at 1 kHz, the typical THD+N
is less than 0.08%.
A BTL configuration eliminates the need for external coupling capacitors on the output. Low supply current of 8
mA makes the device ideal for battery-powered applications. Protection circuitry increases device reliability:
thermal, over-current, and under-voltage shutdown.
Efficient class-D modulation enables the TPA2000D2 to operate at full power into 3-Ω loads at an ambient
temperature of 85°C.
AVAILABLE OPTIONS(1)
PACKAGED DEVICE
TA
–40°C to 85°C
TSSOP (PW)
TSSOP (PWP)(2)
TPA2000D2PW
TPA2000D2PWP
(1) For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI web site at www.ti.com.
(2) The PWP package is available taped and reeled. To order a taped and reeled part, add the suffix R to
the part number (e.g., TPA2000D2PWPR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2000–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.