TPA102
150-mW STEREO AUDIO POWER AMPLIFIER
SLOS213C – AUGUST 1998 – REVISED MARCH 2000
DGN PACKAGE
(TOP VIEW)
150 mW Stereo Output
PC Power Supply Compatible
– Fully Specified for 3.3 V and 5 V
Operation
BYPASS
GND
IN1–
V 1
1
2
3
4
8
7
6
5
O
– Operation to 2.5 V
SHUTDOWN
IN2–
V
DD
Pop Reduction Circuitry
V 2
O
Internal Mid-Rail Generation
Thermal and Short-Circuit Protection
Surface-Mount Packaging
– PowerPAD MSOP
Pin Compatible With LM4881
description
The TPA102 is a stereo audio power amplifier packaged in an 8-pin PowerPAD MSOP package capable of
delivering 150 mW of continuous RMS power per channel into 8-Ω loads. Amplifier gain is externally configured
by means of two resistors per input channel and does not require external compensation for settings of 1 to 10.
THD+N when driving an 8-Ω load from 5 V is 0.1% at 1 kHz, and less than 2% across the audio band of 20 Hz
to 20 kHz. For 32-Ω loads, the THD+N is reduced to less than 0.06% at 1 kHz, and is less than 1% across the
audiobandof20Hzto20kHz. For10-kΩ loads, theTHD+Nperformanceis0.01%at1kHz, andlessthan0.02%
across the audio band of 20 Hz to 20 kHz.
typical application circuit
325 kΩ
325 kΩ
V
6
7
DD
V
DD
R
C
F
S
V
/2
DD
Audio
Input
R
I
IN1–
8
1
V
1
O
O
–
+
C
I
C
C
C
C
BYPASS
IN2–
C
B
Audio
Input
R
I
4
3
V
2
5
2
–
+
C
I
From Shutdown
Control Circuit
SHUTDOWN
Bias
Control
R
F
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265