TP1961/TP1962/TP1964
7ns, 1/2/4, Ultra-High-Speed, +3V/+5V, Beyond-the-Rails Comparators
Features
Description
The TP1961/TP1962/TP1964 are low-power,
Ultra-Fast, 7ns Propagation Delay
ultra-high-speed
comparators
with
internal
Ideal for +3V and +5V Single-Supply Applications
Offset Voltage: ± 6.0 mV Maximum
Rail to Rail Input and Output
hysteresis. These devices are optimized for single
+3V or +5V operation. The input common-mode
range extends 300mV beyond the rail, and the
outputs can sink or source 4mA to within 80mV of
GND and VCC. Propagation delay is 7ns (50mV
overdrive), while supply current is 1mA per
comparator.
The internal input hysteresis eliminates output
switching due to internal input noise voltage,
reducing current draw. The push-pull output
supports rail-to-rail output swing, and interfaces with
CMOS/TTL logic. The output toggle frequency can
reach a typical of 50 MHz while limiting supply
current surges and dynamic power consumption
during switching.
7.5mV Internal Hysteresis for Clean Switching
Push-Pull, CMOS/TTL Compatible Output
Input Common-Mode Range Extends 300 mV
No Phase Reversal for Overdriven Inputs
Shut-down Function (TP1961N Only)
Supply Voltage: 2.5V to 5.5V
Green, Space-Saving SOT23-5 Package Available
Applications
The TP1961 single comparators are available in
shout-down function, and the tiny SOT23 package
for space-conservative designs. All devices are
specified for the temperature range of –40°C to
+85°C.
High-speed Line or Digital Line Receivers
High Speed Sampling Circuits
Peak and Zero-crossing Detectors
Threshold Detectors/Discriminators
Sensing at Ground or Supply Line
Logic Level Shifting or Translation
Window Comparators
3PEAK and the 3PEAK logo are registered trademarks of
3PEAK INCORPORATED. All other trademarks are the property
of their respective owners.
IR Receivers
Clock and Data Signal Restoration
Telecom, Portable Communications
Pin Configuration (Top View)
The TP1961 Comparator in IR Receivers
www.3peakic.com.cn
Rev. B
1