TP1981
3.5ns, Single-Supply, Push-pull, TTL/CMOS Comparator
Features
Description
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
Fully specified rail to rail at VCC = 2.5 V to 5.5 V
The TP1981 is a very fast comparator. These comparators
are exceptionally versatile and easy to use. Features include
an input common mode range from -0.2 V to VCC-1.5 V, low
noise, TTL-/CMOS-compatible output drivers, and shutdown
inputs.
Input common-mode voltage from -0.2 V to VCC - 1.5 V
Low glitch CMOS-/TTL-compatible output stage
3.5 ns propagation delay
Support 100pF capacitance loading
13.5 mW at 3.3 V
The device offers 3.5 ns propagation delay with 100 mV
overdrive with 4 mA typical quiescent current. The maximum
detectable signal frequency exceeds 250MHz.
Shutdown pin
Replacement for ADCMP601/MAX999
−40°C to +125°C operation
The TTL-/CMOS-compatible output stage is designed to
drive up to 10 pF with full timing specs and to degrade in a
graceful and linear fashion as additional capacitance is
added. The comparator input stage offers robust protection
against large input overdrive, and the output does not
phase-reverse when the valid input signal range is exceeded.
Application
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
High speed instrumentation
Clock and data signal restoration
Logic level shifting or translation
Pulse spectroscopy
The TP1981 is available in a 6-lead SC70 package.
High speed line receivers
Threshold detection
Peak and zero-crossing detectors
High speed trigger circuitry
Pulse-width modulators
Current/voltage-controlled oscillators
Automatic test equipment (ATE)
Product family table
Table 1.
P/N
CH
Tpd
Icc
Vcc
Output stype
Hyst
package
TP1981
1
3.5 ns 4.1 mA
2.5V – 5.5V
Push-pull
5 mV
SC70-6
www.3peak.com
Rev.A.1
1 / 8