TL16C752C
DUAL UART
WITH 64-BYTE FIFO
www.ti.com
SLLS646–MARCH 2008
1
FEATURES
•
ST16C654/654D Pin Compatible With
Additional Enhancements (PFB Package Only)
•
•
•
RS-485 Mode Support
Support 1.8-V, 2.5-V, 3.3-V, or 5-V Supply
•
•
•
•
•
Supports up to 24-MHz Crystal Input Clock
(1.5 Mbps)
Characterized for Operation From –40°C to
85°C, Available in Commercial and Industrial
Temperature Grades
Supports up to 48-MHz Oscillator Input Clock
(3 Mbps) for 5-V Operation
•
•
Software-Selectable Baud-Rate Generator
Supports up to 32-MHz Oscillator Input Clock
(2 Mbps) for 3.3-V Operation
Prescalable Provides Additional Divide-by-4
Function
Supports up to 24-MHz Input Clock (1.5 Mbps)
for 2.5-V Operation
•
•
Programmable Sleep Mode
Programmable Serial Interface Characteristics
Supports up to 16-MHz Input Clock (1 Mbps)
for 1.8-V Operation
–
–
5-, 6-, 7-, or 8-Bit Characters
Even, Odd, or No Parity Bit Generation and
Detection
•
•
•
64-Byte Transmit FIFO
64-Byte Receive FIFO With Error Flags
–
1-, 1.5-, or 2-Stop Bit Generation
Programmable and Selectable Transmit and
Receive FIFO Trigger Levels for DMA and
Interrupt Generation
•
•
False Start Bit Detection
Complete Status Reporting Capabilities in
Both Normal and Sleep Mode
•
•
Programmable Receive FIFO Trigger Levels for
Software/Hardware Flow Control
•
•
•
•
Line Break Generation and Detection
Internal Test and Loopback Capabilities
Fully Prioritized Interrupt System Controls
Software/Hardware Flow Control
–
–
Programmable Xon/Xoff Characters
Modem Control Functions (CTS, RTS, DSR,
DTR, RI, and CD)
Programmable Auto-RTS and Auto-CTS
•
•
Optional Data Flow Resume by Xon Any
Character
•
IrDA Capability
DMA Signaling Capability for Both Received
and Transmitted Data on PN Package
DESCRIPTION
The TL16C752C is a quad universal asynchronous receiver/transmitter (UART) with 64-byte FIFOs, automatic
hardware/software flow control, and data rates up to 3 Mbps. It incorporates the functionality of four UARTs, each
UART having its own register set and FIFOs. The four UARTs share only the data bus interface and clock
source, otherwise they operate independently. Another name for the UART function is asynchronous
communications element (ACE), and these terms are used interchangeably. The bulk of this document describes
the behavior of each ACE, with the understanding that four such devices are incorporated into the TL16C752C.
The TL16C752C offers enhanced features. It has a transmission control register (TCR) that stores received FIFO
threshold level to start/stop transmission during hardware and software flow control. With the FIFO RDY register,
the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers provide
the user with error indications, operational status, and modem interface control. System interrupts may be
tailored to meet user requirements. An internal loopback capability allows onboard diagnostics.
Each UART transmits data sent to it from the peripheral 8-bit bus on the TX signal and receives characters on
the RX signal. Characters can be programmed to be 5, 6, 7, or 8 bits. The UART has a 64-byte receive FIFO and
transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own
desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity
and 1-, 1.5-, or 2-stop bits. The receiver can detect break, idle or framing errors, FIFO overflow, and parity errors.
The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control
operations, and software flow control and hardware flow control capabilities.
The TL16C752C is available in a 32-pin QFN (RHB) package. A 48-pin QFP (PFB) package will be available in
late 2008.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2008, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
替代型号
如果您发现信息不准确，
