5秒后页面跳转
TL16C752CIPFB PDF预览

TL16C752CIPFB

更新时间: 2024-11-22 07:04:35
品牌 Logo 应用领域
德州仪器 - TI 微控制器和处理器串行IO控制器通信控制器外围集成电路先进先出芯片数据传输PC时钟
页数 文件大小 规格书
52页 1293K
描述
DUAL UART WITH 64-BYTE FIFO

TL16C752CIPFB 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFP
包装说明:TFQFP, TQFP48,.35SQ针数:48
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:1.7
Samacsys Confidence:Samacsys Status:Released
Samacsys PartID:607216Samacsys Pin Count:48
Samacsys Part Category:Integrated CircuitSamacsys Package Category:Other
Samacsys Footprint Name:QFP50P900X900X120-48NSamacsys Released Date:2017-01-12 12:59:53
Is Samacsys:N其他特性:ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
地址总线宽度:3边界扫描:NO
最大时钟频率:48 MHz通信协议:ASYNC, BIT
最大数据传输速率:0.375 MBps外部数据总线宽度:8
JESD-30 代码:S-PQFP-G48JESD-609代码:e4
长度:7 mm低功率模式:NO
湿度敏感等级:2串行 I/O 数:2
端子数量:48最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:TFQFP封装等效代码:TQFP48,.35SQ
封装形状:SQUARE封装形式:FLATPACK, THIN PROFILE, FINE PITCH
峰值回流温度(摄氏度):260电源:1.8/5 V
认证状态:Not Qualified座面最大高度:1.2 mm
子类别:Serial IO/Communication Controllers最大压摆率:40 mA
最大供电电压:5.5 V最小供电电压:4.5 V
标称供电电压:5 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:7 mm
uPs/uCs/外围集成电路类型:SERIAL IO/COMMUNICATION CONTROLLER, SERIALBase Number Matches:1

TL16C752CIPFB 数据手册

 浏览型号TL16C752CIPFB的Datasheet PDF文件第2页浏览型号TL16C752CIPFB的Datasheet PDF文件第3页浏览型号TL16C752CIPFB的Datasheet PDF文件第4页浏览型号TL16C752CIPFB的Datasheet PDF文件第5页浏览型号TL16C752CIPFB的Datasheet PDF文件第6页浏览型号TL16C752CIPFB的Datasheet PDF文件第7页 
TL16C752C  
www.ti.com .................................................................................................................................................... SLLS646A MARCH 2008REVISED AUGUST 2009  
DUAL UART WITH 64-BYTE FIFO  
Check for Samples: TL16C752C  
1
FEATURES  
ST16C654/654D Pin Compatible With  
Additional Enhancements (PFB Package Only)  
RS-485 Mode Support  
Support 1.8-V, 2.5-V, 3.3-V, or 5-V Supply  
Supports up to 24-MHz Crystal Input Clock  
(1.5 Mbps)  
Characterized for Operation From –40°C to  
85°C, Available in Commercial and Industrial  
Temperature Grades  
Supports up to 48-MHz Oscillator Input Clock  
(3 Mbps) for 5-V Operation  
Software-Selectable Baud-Rate Generator  
Supports up to 32-MHz Oscillator Input Clock  
(2 Mbps) for 3.3-V Operation  
Prescalable Provides Additional Divide-by-4  
Function  
Supports up to 24-MHz Input Clock (1.5 Mbps)  
for 2.5-V Operation  
Programmable Sleep Mode  
Programmable Serial Interface Characteristics  
Supports up to 16-MHz Input Clock (1 Mbps)  
for 1.8-V Operation  
5-, 6-, 7-, or 8-Bit Characters  
Even, Odd, or No Parity Bit Generation and  
Detection  
64-Byte Transmit FIFO  
64-Byte Receive FIFO With Error Flags  
1-, 1.5-, or 2-Stop Bit Generation  
Programmable and Selectable Transmit and  
Receive FIFO Trigger Levels for DMA and  
Interrupt Generation  
False Start Bit Detection  
Complete Status Reporting Capabilities in  
Both Normal and Sleep Mode  
Programmable Receive FIFO Trigger Levels for  
Software/Hardware Flow Control  
Line Break Generation and Detection  
Internal Test and Loopback Capabilities  
Fully Prioritized Interrupt System Controls  
Software/Hardware Flow Control  
Programmable Xon/Xoff Characters  
Modem Control Functions (CTS, RTS, DSR,  
DTR, RI, and CD)  
Programmable Auto-RTS and Auto-CTS  
Optional Data Flow Resume by Xon Any  
Character  
IrDA Capability  
DMA Signaling Capability for Both Received  
and Transmitted Data on PN Package  
DESCRIPTION  
The TL16C752C is a dual universal asynchronous receiver/transmitter (UART) with 64-byte FIFOs, automatic  
hardware/software flow control, and data rates up to 3 Mbps. It incorporates the functionality of four UARTs, each  
UART having its own register set and FIFOs. The four UARTs share only the data bus interface and clock  
source, otherwise they operate independently. Another name for the UART function is asynchronous  
communications element (ACE), and these terms are used interchangeably. The bulk of this document describes  
the behavior of each ACE, with the understanding that four such devices are incorporated into the TL16C752C.  
The TL16C752C offers enhanced features. It has a transmission control register (TCR) that stores received FIFO  
threshold level to start/stop transmission during hardware and software flow control. With the FIFO RDY register,  
the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers provide  
the user with error indications, operational status, and modem interface control. System interrupts may be  
tailored to meet user requirements. An internal loopback capability allows onboard diagnostics.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2008–2009, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

TL16C752CIPFB 替代型号

型号 品牌 替代类型 描述 数据表
TL16C752CPFB TI

类似代替

DUAL UART WITH 64-BYTE FIFO
TL16C752CIPFBR TI

类似代替

DUAL UART WITH 64-BYTE FIFO
TL16C752CIRHBR TI

类似代替

DUAL UART WITH 64-BYTE FIFO

与TL16C752CIPFB相关器件

型号 品牌 获取价格 描述 数据表
TL16C752CIPFBR TI

获取价格

DUAL UART WITH 64-BYTE FIFO
TL16C752CIPFBRQ1 TI

获取价格

具有 64 字节 FIFO 的汽车类双路 UART | PFB | 48 | -40 to
TL16C752CI-Q1 TI

获取价格

具有 64 字节 FIFO 的汽车类双路 UART
TL16C752CIRHB TI

获取价格

DUAL UART WITH 64-BYTE FIFO
TL16C752CIRHBR TI

获取价格

DUAL UART WITH 64-BYTE FIFO
TL16C752CIRHBRG4 TI

获取价格

DUAL UART WITH 64-BYTE FIFO
TL16C752CPFB TI

获取价格

DUAL UART WITH 64-BYTE FIFO
TL16C752CPFBR TI

获取价格

DUAL UART WITH 64-BYTE FIFO
TL16C752CRHB TI

获取价格

DUAL UART WITH 64-BYTE FIFO
TL16C752CRHBR TI

获取价格

DUAL UART WITH 64-BYTE FIFO