Industrial Ethernet Switch EN50155 Unmanaged Ethernet Switch
v1.0 / Nov, 2013
TGPS-1080-M12 Series
TGPS-1080-M12 Series
EN50155 8-port unmanaged Gigabit PoE Ethernet switch with
8x10/100/1000Base-T(X) P.S.E., M12 connector
Features
1
Leading EN50155-compliant Ethernet switch for rolling stock application
Provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
Supports IEEE 802.3at compliant PoE with maximum 30Watts per port
Support dual power inputs for power redundancy
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Support flow control
M12 connectors to guarantee reliable operation against environmental disturbances
Rigid IP-40 housing design
Wall mounting enabled
Introduction
ORing's TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The
TGPS-1080-M12 is an un-managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant
with EN50155 requirement. TGPS-1080-M12 also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over
standard twisted-pair cable in an Ethernet network. Each TGPS-1080-M12 switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is
a device (switch or hub for instance) that will provide power in a PoE setup. TGPS-1080-M12 EN50155 Ethernet switch use M12 connectors to ensure tight, robust
connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range
from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE
Ethernet application.
Practical Operation
TGPS-1080-M12 can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different
power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over
immediately to guarantee a non-stop operation.
1-618
www.oring-networking.com