STLC2410B
BLUETOOTH® BASEBAND
1
FEATURES
®
■ Bluetooth V1.1 specification compliant
■ Point-to-point, point-to-multi-point (up to 7
slaves) and scatternet capability
■ Asynchronous Connection-Less (ACL) link
support giving data rates up to 721kbps
■ Synchronous Connection-Oriented (SCO) link
■ Standard BlueRF bus interface
■ ARM7TDMI CPU
TFBGA132 (8x8x1.2mm)
– 32-bit Core
– Run from 13MHz external clock
– Support of 32 kHz crystal for low power mode
■ Memory organization
ORDERING NUMBER: STLC2410B
Temperature range: -40 to +85 °C
– 64KByte on-chip RAM
– 4KByte on-chip boot ROM
■ Extended temperature range
– Programmable external memory interface (EMI)
– 8-bit or 16-bit external data bus
– Up to 3 programmable chip-select signals
– Hold-acknowledge bus arbitration support
■ HW support for all packet types
– ACL: DM1, 3, 5 and DH1, 3, 5
– SCO: HV1, 2, 3 and DV1
■
Compliant to automotive specification AEC-Q100
1.1 Applications Features
Typical applications in which the STLC2410B can
be used are:
■ Portable computers, PDA
■ Modems
■ Communication interfaces
– Serial Synchronous Interface
– Two enhanced 16550 UART's with 128 byte
fifo depth
■ Handheld data transfer devices
■ Cameras
– 12Mbps USB interface
– Fast master I2C bus interface
– Multi slot PCM interface
– 16 programmable GPIO
■ Computer peripherals
■ Other type of devices that require the wireless
®
communication provided by Bluetooth
■ Cable replacement
– 2 external interrupts and various interrupt
possibilities through other interfaces
■ Ciphering support for up to 128-bit key
■ Receiver Signal Strenght Indication (RSSI)
support for power-controlled links
■ Separate control for external power amplifier
(PA) for power class1 support.
2
DESCRIPTION
The STLC2410B offers a compact and complete
solution for short-range wireless connectivity. It in-
corporates all the lower layer functions of the Blue-
®
tooth protocol.
■ Software support
– Low level (up to HCI) stack or embedded
stack with profiles
– Support of UART and USB HCI transport layers
■ Idle and power down modes
– Ultra low power in idle mode
– Low standby current
The microcontroller allows the support of all data
packets of Bluetooth in addition to voice. The em-
®
bedded controller can be used to run the Blue-
®
tooth protocol and application layers if required.
The software is located in an external memory ac-
cessed through the external memory interface.
January 2004
1/20
Rev. 2.0