8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
SMP6LC5.0
Thru
SMP6LC12
DESCRIPTION (600 watt)
This 16 pin 2 line Bidirectional LOW CAPACITANCE array is designed for use
in applications where protection is required at the board level. Providing
protection from voltage transients caused by electrostatic discharge (ESD) as
defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4, and
effects of secondary lighting as stated by IEC 1000-4-5.
TVSarrayÔ Series
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a
peak power of 600 watts for an 10x1000 msec pulse and are designed to be
used for secondary surge protection on telephone lines. This device can be
used in either common or differential mode applications. For example in the
circuit diagram on the following page use: TIP to (A) and (C) to ground, RING
to (B) and (D) to ground for common mode, or TIP to (A) and RING to (C), or
TIP to (B) and RING to (D) for differential mode.
FEATURES
·
·
·
600 watts Peak Pulse Power 10x1000
Protects up through 12 Volt Components
Protects 4 Unidirectional lines or 2 Bidirectional
Lines
Provides electrically isolated protection
SO-16 Packaging
MECHANICAL
·
·
·
·
Molded SO-16 Surface Mount
Weight: 0.128 grams (approximate)
Body Marked with Logo, and device number
Pin #1 defined by DOT on top of package
·
·
·
UL 94V-0 Flammability Classification
PACKAGING
·
·
·
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500 pieces (OPTIONAL
Carrier tubes 50 pcs per (STANDARD)
MAXIMUM RATINGS
·
·
·
·
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 600 Watts (10/1000 msec, Figure 1 and 2)
Pulse Repetition Rate: <.01%
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless otherwise specified
STAND-OFF
VOLTAGE
VWM
BREAKDOWN
VOLTAGE
VBR
CLAMPING
VOLTAGE
VC
MAXIMUM
LEAKAGE
CURRENT
@VWM
PEAK
PULSE
CURRENT
@ 10/1000 µS
IPP
CAPACITANCE
(f=1 MHz)
@0V
PART
NUMBER
DEVICE
MARKING
@10 mA
@ IPP
C
PER LINE PAIR
pF
ID
µA
VOLTS
VOLTS
VOLTS
AMPS
MAX
5.0
MIN
6.0
MAX
9.6
TYP
300
300
2.0
TYP
10
TYP
30
SMP6LC05
SMP6LC5.0
SMP6LC6.5 SMP6LC6.5
SMP6LC12 SMP6LC12
6.5
7.22
13.3
12.4
19.9
10
30
12.0
10
30
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage VWM. Product
selected voltage should be equal to or greater than the continuous or peak operating voltage of the circuit to be
protected.
Application: The SMP6LCXX product is designed for transient voltage suppression protection of components at the
board level. It is an ideal product to be used for protection of HIGH SPEED I/O TRANSCEIVERS.
MSC1379.PDF ISO 9001 CERTIFIED
REV C 10/15/99