New Product
SMP3V3 thru SMP36A
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
• Very low profile - typical height of 1.0 mm
eSMP® Series
• Ideal for automated placement
• Available in uni-directional
• 400 W peak pulse power capability with a
10/1000 µs waveform
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
DO-220AA (SMP)
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
VWM
3.3 V to 36 V
• Halogen-free according to IEC 61249-2-21 definition
PPPM
400 W
IFSM
40 A
MECHANICAL DATA
TJ max.
150 °C
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3
- halogen-free, RoHS compliant, and
commercial grade
TYPICAL APPLICATIONS
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting on
ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
UNIT
W
Peak pulse power dissipation with a 10/1000 µs waveform (fig. 1) (1)(2)
Peak pulse current with a 10/1000 µs waveform (1)
Peak forward surge current 10 ms single half sine-wave (2)
Maximum instantaneous forward voltage at 25 A (3)
Operating junction and storage temperature range
400
IPPM
See table next page
A
IFSM
40
2.5
A
VF
V
TJ, TSTG
- 55 to + 150
°C
Notes
(1)
(2)
(3)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
Pulse test: 300 µs pulse width, 1 % duty cycle
Document Number: 88481
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
56
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000