19013 36th Ave. West Suite H Lynnwood, WA 98036, USA
SM7745D Series
4 Pad 7 x 5mm Leadless Surface Mount Ceramic Clock Oscillator
CMOS with Enable/ Disable, 3rd Overtone Crystal Used
Low Jitter
–
70.00 MHz 170.00 MHz
Consult factory for higher frequencies
Standard Specifications
Overall Frequency Stability
SM7745D: ± 50 PPM, SM7744D: ± 25 PPM, SM7720D: ± 20 PPM over Operating Temp. Range
-
°
Operating Temperature Range 0 to +70 C is standard, but can be extended to 40 to +85°C for certain frequencies
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
5.0 volts, 3.3 volts and 2.5 volts available, .01 µF bypass cap recommended
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Logic Levels
Jitter
Logic “1” 90% of Vcc MIN; Logic “0” 10% of Vcc MAX
1 pS RMS maximum, from 12 kHz to 20 MHz from carrier
Output Load
Enable/Disable Option (E/D)
Standard load is 15pF maximum, see Test Circuit 2 (consult factory for heavier loads)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Rise and Fall Time
Tr & Tf (nS) w/ 15pF load
Supply Current
Icc (mA) w/ 15pF load
Frequency Range
(MHz)
Typical
40.0
Maximum
45.0
Typical
2.0
Maximum
3.0
–
70.000 79.999
–
80.000 110.000
75.0
80.0
0.5
1.0
–
110.001 119.999
80.0
90.0
0.5
1.0
–
120.000 170.000
90.0
95.0
0.5
1.0
Part Numbering Guide
SM77 45 D Y -- 70.0M - 30
Packaging
Tray or
16mm tape
8mm pitch
Non-Std Output Load
Model
Blank = 15 pF max, 30 = 30 pF max, 50 = 50 pF max
Frequency in MHz
Frequency Stability
45 = ± 50 PPM
Special Specifications (choose all that apply)
44 = ± 25 PPM
°
Y: Std Specs (5.0V ± 10%, 0 to +70 C, 40/60% Symmetry)
°
20 = ± 20 PPM
E: Extended Operating Temperature Range (- 40 to +85 C)
S: 45/55% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts ± 10%
± 5%
W: Supply Voltage of 2.5 volts
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical:
not to scale
inches (mm)
Solder Pads
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
.09 (2.2)
OUT
GND
3
2
1
2
3
0.01m F
bypass capacitor
4
1
.07 (1.8)
4
E/D
Vcc
.197 (5.0 ± .2)
.075 (1.9)
MAX
.08 (2.0)
Feb 2002
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
6
Pl tronics, Inc.