SGM3756
38V High Efficiency, Boost White
LED Driver with PWM Dimming Control
GENERAL DESCRIPTION
FEATURES
The SGM3756 is an asynchronous Boost WLED driver
with high efficiency, low EMI and high output voltage.
The Boost converter integrates a 40V, 1.5A internal
FET which operates at 1.2MHz switching frequency. Its
strong driving ability can drive single or multiple parallel
LED strings, which can be used as LED driver for smart
phone and tablet backlight.
• Input Voltage Range: 2.7V to 5.5V
• 1:250 Stable Luminance Dimming
• Low EMI by Conducting Ringing Cancelling
• Improved PSRR for Waveless Lighting
• Up to 90% Efficiency
• Switching Frequency: 1.2MHz
• Integrated 40V/1.5A Switch
• Feedback Voltage: 200mV
The default LED current can be programmed by the
external current-sense resistor RSET. By varying the
duty cycle of the PWM signal applied to the CTRL pin,
the internal reference voltage is adjusted, which
ultimately adjusts the LED sink current. With full PWM
duty cycle, the internal reference voltage VREF is 200mV
(TYP). The SGM3756 is essentially a driver that adopts
analog dimming control, and it will not produce audible
noise on the output capacitor. The SGM3756 integrates
ringing cancellation, and it can effectively reduce EMI
noise in DCM mode. The SGM3756 provides excellent
line regulation and load regulation, as well as excellent
load transient response. The SGM3756 also features
various protection functions such as open LED
protection, OCP protection and thermal shutdown
protection.
• PWM Dimming Control
• 38V Open LED Protection for 10 LEDs in Series
• Automatic Soft-Start for Reduced Inrush Current
• Under-Voltage Lockout Protection
• Thermal Shutdown
• -40℃ to +85℃ Operating Temperature Range
• Available in a Green TDFN-2×2-6L Package
APPLICATIONS
Portable Devices Backlight
Small and Medium Size White LCD Display Backlight
The SGM3756 is available in a Green TDFN-2×2-6L
package. It operates over an ambient temperature
range of -40℃ to +85℃.
SG Micro Corp
SEPTEMBER2022–REV. A. 1
www.sg-micro.com