5秒后页面跳转
SC16C752BIBS-F PDF预览

SC16C752BIBS-F

更新时间: 2024-02-16 22:45:58
品牌 Logo 应用领域
恩智浦 - NXP 先进先出芯片
页数 文件大小 规格书
47页 552K
描述
IC,UART,LLCC,32PIN,PLASTIC

SC16C752BIBS-F 技术参数

是否Rohs认证: 符合生命周期:Obsolete
包装说明:QCCN, LCC32,.2SQ,20Reach Compliance Code:unknown
风险等级:5.84JESD-30 代码:S-PQCC-N32
端子数量:32最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:QCCN封装等效代码:LCC32,.2SQ,20
封装形状:SQUARE封装形式:CHIP CARRIER
电源:2.5/5 V认证状态:Not Qualified
子类别:Serial IO/Communication Controllers表面贴装:YES
温度等级:INDUSTRIAL端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
uPs/uCs/外围集成电路类型:SERIAL IO/COMMUNICATION CONTROLLER, SERIALBase Number Matches:1

SC16C752BIBS-F 数据手册

 浏览型号SC16C752BIBS-F的Datasheet PDF文件第2页浏览型号SC16C752BIBS-F的Datasheet PDF文件第3页浏览型号SC16C752BIBS-F的Datasheet PDF文件第4页浏览型号SC16C752BIBS-F的Datasheet PDF文件第5页浏览型号SC16C752BIBS-F的Datasheet PDF文件第6页浏览型号SC16C752BIBS-F的Datasheet PDF文件第7页 
SC16C752  
Dual UART with 64-byte FIFO  
Rev. 04 — 20 June 2003  
Product data  
1. Description  
The SC16C752 is a dual universal asynchronous receiver/transmitter (UART) with  
64-byte FIFOs, automatic hardware/software flow control, and data rates up to  
5 Mbits/s (3.3 V and 5 V). The SC16C752 offers enhanced features. It has a  
transmission control register (TCR) that stores receiver FIFO threshold levels to  
start/stop transmission during hardware and software flow control. With the FIFO  
RDY register, the software gets the status of TXRDY/RXRDY for all four ports in one  
access. On-chip status registers provide the user with error indications, operational  
status, and modem interface control. System interrupts may be tailored to meet user  
requirements. An internal loop-back capability allows on-board diagnostics.  
The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and  
receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or  
8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be  
programmed to interrupt at different trigger levels. The UART generates its own  
desired baud rate based upon a programmable divisor and its input clock. It can  
transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect  
break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can  
detect FIFO underflow. The UART also contains a software interface for modem  
control operations, and has software flow control and hardware flow control  
capabilities.  
The SC16C752 is available in a plastic LQFP48 package.  
2. Features  
Pin compatible with SC16C2550 with additional enhancements  
Up to 5 Mbits/s baud rate (at 3.3 V and 5 V; at 2.5 V maximum baud rate is  
3 Mbits/s)  
64-byte transmit FIFO  
64-byte receive FIFO with error flags  
Programmable and selectable transmit and receive FIFO trigger levels for DMA  
and interrupt generation  
Software/hardware flow control  
Programmable Xon/Xoff characters  
Programmable auto-RTS and auto-CTS  
Optional data flow resume by Xon any character  
DMA signalling capability for both received and transmitted data  
Supports 5 V, 3.3 V and 2.5 V operation  
Software selectable baud rate generator  
Prescaler provides additional divide-by-4 function  

与SC16C752BIBS-F相关器件

型号 品牌 获取价格 描述 数据表
SC16C752BIBS-S NXP

获取价格

暂无描述
SC16C752IB48 NXP

获取价格

Dual UART with 64-byte FIFO
SC16C752IB48,128 NXP

获取价格

SC16C752 - Dual UART with 64-byte FIFO QFP 48-Pin
SC16C752IB48,151 NXP

获取价格

SC16C752 - Dual UART with 64-byte FIFO QFP 48-Pin
SC16C754 NXP

获取价格

Quad UART with 64-byte FIFO
SC16C754B NXP

获取价格

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
SC16C754BIA68 NXP

获取价格

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
SC16C754BIA68,518 NXP

获取价格

SC16C754B - 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs LCC 68-Pin
SC16C754BIA68-S NXP

获取价格

IC,UART,LDCC,68PIN,PLASTIC
SC16C754BIB80 NXP

获取价格

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs