5秒后页面跳转
SC16C754BIBM-S PDF预览

SC16C754BIBM-S

更新时间: 2024-02-23 04:34:25
品牌 Logo 应用领域
恩智浦 - NXP 先进先出芯片
页数 文件大小 规格书
49页 572K
描述
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs

SC16C754BIBM-S 技术参数

Source Url Status Check Date:2013-06-14 00:00:00是否无铅: 含铅
是否Rohs认证: 符合生命周期:Active
Reach Compliance Code:unknown风险等级:5.74
Base Number Matches:1

SC16C754BIBM-S 数据手册

 浏览型号SC16C754BIBM-S的Datasheet PDF文件第2页浏览型号SC16C754BIBM-S的Datasheet PDF文件第3页浏览型号SC16C754BIBM-S的Datasheet PDF文件第4页浏览型号SC16C754BIBM-S的Datasheet PDF文件第5页浏览型号SC16C754BIBM-S的Datasheet PDF文件第6页浏览型号SC16C754BIBM-S的Datasheet PDF文件第7页 
SC16C754  
Quad UART with 64-byte FIFO  
Rev. 04 — 19 June 2003  
Product data  
1. Description  
The SC16C754 is a quad universal asynchronous receiver/transmitter (UART) with  
64-byte FIFOs, automatic hardware/software flow control, and data rates up to  
5 Mbits/s (3.3 V and 5 V). The SC16C754 offers enhanced features. It has a  
transmission control register (TCR) that stores receiver FIFO threshold levels to  
start/stop transmission during hardware and software flow control. With the FIFO  
RDY register, the software gets the status of TXRDY/RXRDY for all four ports in one  
access. On-chip status registers provide the user with error indications, operational  
status, and modem interface control. System interrupts may be tailored to meet user  
requirements. An internal loop-back capability allows on-board diagnostics.  
The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and  
receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or  
8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be  
programmed to interrupt at different trigger levels. The UART generates its own  
desired baud rate based upon a programmable divisor and its input clock. It can  
transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect  
break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can  
detect FIFO underflow. The UART also contains a software interface for modem  
control operations, and has software flow control and hardware flow control  
capabilities.  
The SC16C754 is available in plastic LQFP80 and PLCC68 packages.  
2. Features  
Pin compatible with SC16C654IA68 and SC16C554IA68 with additional  
enhancements  
Up to 5 Mbits/s baud rate (at 3.3 V and 5 V; at 2.5 V maximum baud rate is  
3 Mbits/s)  
64-byte transmit FIFO  
64-byte receive FIFO with error flags  
Programmable and selectable transmit and receive FIFO trigger levels for DMA  
and interrupt generation  
Software/hardware flow control  
Programmable Xon/Xoff characters  
Programmable auto-RTS and auto-CTS  
Optional data flow resume by Xon any character  
DMA signalling capability for both received and transmitted data  
Supports 5 V, 3.3 V and 2.5 V operation  
Software selectable baud rate generator  

与SC16C754BIBM-S相关器件

型号 品牌 获取价格 描述 数据表
SC16C754IA68 NXP

获取价格

Quad UART with 64-byte FIFO
SC16C754IA68,518 NXP

获取价格

SC16C754IA68
SC16C754IB80 NXP

获取价格

Quad UART with 64-byte FIFO
SC16C754IB80-S NXP

获取价格

IC,UART,QFP,80PIN,PLASTIC
SC16C850 NXP

获取价格

2.5 V to 3.3 V UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and 16 mode or
SC16C850IBS NXP

获取价格

2.5 V to 3.3 V UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and 16 mode or
SC16C850IBS,151 NXP

获取价格

SC16C850 - 2.5 V to 3.3 V UART, 16 mode or 68 mode parallel bus interface QFN 32-Pin
SC16C850IBS,157 NXP

获取价格

SC16C850 - 2.5 V to 3.3 V UART, 16 mode or 68 mode parallel bus interface QFN 32-Pin
SC16C850IBS/Q900 NXP

获取价格

IC 1 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQCC32, 5 X 5 MM, 0.85 MM HEIGHT, ROHS CO
SC16C850IBS/Q900,5 NXP

获取价格

SC16C850 - 2.5 V to 3.3 V UART, 16 mode or 68 mode parallel bus interface QFN 32-Pin