5秒后页面跳转
SC16C754BIB80-S PDF预览

SC16C754BIB80-S

更新时间: 2024-09-27 21:06:59
品牌 Logo 应用领域
恩智浦 - NXP 外围集成电路
页数 文件大小 规格书
51页 253K
描述
IC,UART,QFP,80PIN,PLASTIC

SC16C754BIB80-S 技术参数

生命周期:Obsolete包装说明:QFP, QFP80,.55SQ,20
Reach Compliance Code:unknown风险等级:5.72
JESD-30 代码:S-PQFP-G80端子数量:80
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:QFP
封装等效代码:QFP80,.55SQ,20封装形状:SQUARE
封装形式:FLATPACK电源:2.5,3.3/5 V
认证状态:Not Qualified子类别:Serial IO/Communication Controllers
表面贴装:YES温度等级:INDUSTRIAL
端子形式:GULL WING端子节距:0.5 mm
端子位置:QUADuPs/uCs/外围集成电路类型:SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Base Number Matches:1

SC16C754BIB80-S 数据手册

 浏览型号SC16C754BIB80-S的Datasheet PDF文件第2页浏览型号SC16C754BIB80-S的Datasheet PDF文件第3页浏览型号SC16C754BIB80-S的Datasheet PDF文件第4页浏览型号SC16C754BIB80-S的Datasheet PDF文件第5页浏览型号SC16C754BIB80-S的Datasheet PDF文件第6页浏览型号SC16C754BIB80-S的Datasheet PDF文件第7页 
SC16C754B  
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte  
FIFOs  
Rev. 04 — 6 October 2008  
Product data sheet  
1. General description  
The SC16C754B is a quad Universal Asynchronous Receiver/Transmitter (UART) with  
64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s  
(3.3 V and 5 V). The SC16C754B offers enhanced features. It has a Transmission Control  
Register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during  
hardware and software flow control. With the FIFO Ready (FIFO Rdy) register, the  
software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status  
registers provide the user with error indications, operational status, and modem interface  
control. System interrupts may be tailored to meet user requirements. An internal  
loopback capability allows on-board diagnostics.  
The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and  
receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or  
8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed  
to interrupt at different trigger levels. The UART generates its own desired baud rate  
based upon a programmable divisor and its input clock. It can transmit even, odd, or no  
parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors,  
FIFO overflow, and parity errors. The transmitter can detect FIFO underflow. The UART  
also contains a software interface for modem control operations, and has software flow  
control and hardware flow control capabilities.  
The SC16C754B is available in plastic LQFP64, LQFP80 and PLCC68 packages.  
2. Features  
I 4 channel UART  
I 5 V, 3.3 V and 2.5 V operation  
I Pin compatible with SC16C654IA68, TL16C754, and SC16C554IA68 with additional  
enhancements, and software compatible with TL16C754  
I Up to 5 Mbit/s data rate (at 3.3 V and 5 V; at 2.5 V maximum data rate is 3 Mbit/s)  
I 5 V tolerant on input only pins1  
I 64-byte transmit FIFO  
I 64-byte receive FIFO with error flags  
I Industrial temperature range (40 °C to +85 °C)  
I Programmable and selectable transmit and receive FIFO trigger levels for DMA and  
interrupt generation  
1. For data bus pins D7 to D0, see Table 24 “Limiting values”.  

与SC16C754BIB80-S相关器件

型号 品牌 获取价格 描述 数据表
SC16C754BIB80-T NXP

获取价格

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
SC16C754BIBM NXP

获取价格

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
SC16C754BIBM,128 NXP

获取价格

SC16C754B - 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs QFP 64-Pin
SC16C754BIBM,151 NXP

获取价格

SC16C754B - 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs QFP 64-Pin
SC16C754BIBM,157 NXP

获取价格

SC16C754B - 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs QFP 64-Pin
SC16C754BIBM-S NXP

获取价格

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
SC16C754IA68 NXP

获取价格

Quad UART with 64-byte FIFO
SC16C754IA68,518 NXP

获取价格

SC16C754IA68
SC16C754IB80 NXP

获取价格

Quad UART with 64-byte FIFO
SC16C754IB80-S NXP

获取价格

IC,UART,QFP,80PIN,PLASTIC