RClamp2504P & RClamp3304P
RailClamp®
2.5V & 3.3V TVS Arrays
PROTECTION PRODUCTS - RailClamp®
Features
Description
RailClamp® is a low capacitance TVS array designed to
protect high speed data interfaces. This series has been
specifically designed to protect sensitive components
which are connected to data and transmission lines from
overvoltage caused by ESD (electrostatic discharge), CDE
(Cable Discharge Events), and EFT (electrical fast tran-
sients).
Transient protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Array of surge rated diodes with internal TVS Diode
Small package saves board space
Protects up to four I/O lines
Low capacitance (<0.8pF) for high-speed interfaces
Minimal insertion loss to 3.0GHz
The monolithic design incorporates surge rated, low
capacitance steering diodes and a TVS diode in a single
package. Each line has a maximum capacitance of
< 0.8pF to ground. The capacitance of each line is well
matched for consistant signal balance. This device is
optimized for ESD protection of portable electronics. It
may be used to meet the ESD immunity requirements
of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact
discharge).
The RClampTM2504P and RClampTM3304P are con-
structed using Semtech’s proprietary EPD process
technology. The EPD process provides low standoff
voltages with significant reductions in leakage current
and capacitance over silicon-avalanche diode pro-
cesses. They feature a true operating voltage of 2.5
volts and 3.3 volts for superior protection.
Low operating voltage: 2.5V and 3.3V
Low leakage current and clamping voltage
Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP1616P6 package
RoHS/WEEE Compliant
Nominal Dimensions: 1.6 x 1.6 x 0.58 mm
Lead Finish: NiPdAu
Molding compound flammability rating: UL 94V-0
Marking: Marking Code + Date Code
Packaging: Tape and Reel per EIA 481
Applications
Multi Media Card (MMC) Interfaces
SATA Interfaces
SD Card Interfaces
SIM Ports
These devices are in a 6-pin, RoHS/WEEE compliant,
SLP1616P6 package measuring 1.6 x 1.6 x 0.58mm.
The leads are spaced at a pitch of 0.5mm and are
finished with lead-free NiPdAu.
MDDI Ports
MPPI Ports
Circuit Diagram
Pin Configuration
1.6
1
3
1.6
6
1
2
5
6
0.5
0.58
GND
SLP1616P6 (Bottom View)
Nominal Dimensions in mm
www.semtech.com
1
Revision 04/12/2007