Preliminary Specifications
High Power, 6 Channel Transmit Combiner for
AMPS/GSM/IS-95 800 - 960 MHz
PD60-0015-06S
V1.00
Features
.75
(19.1)
2.00
NOM
(50.8)
1.00
(25.4)
●
Low Loss
TYP
.38
(9.5)
●
High Power Handling
J1 J2 J3 J4 J5 J6
●
Integral Heat Sink
High Isolation
Low VSWR
.15
(3.8)
●
●
●
5.70
(144.8)
Low Cost
6.00
(152.4)
Description
.16
(4.0)
THRU
4X
M/A-COM’s PD60-0015-05S is designed to provide a low
loss method of combining signals from six amplifiers or
transmitters in a number of cellular bands. High power
internal components and an integral heat sink enables
the device to combine non-coherant 50 Watt signals.
Microstrip construction offers a design that is cost effec-
tive and highly repeatable.
J 7
.15
(3.8)
6.20
(157.5)
3.25
(82.6)
SMA JACK
(7 PLS)
6.50
(165.1)
(Dimensions in parenthesis are in mm)
Performance Specifications: 800-960 MHz
The required method of cooling is forced air at 50 CFM
at +60°C Max ambient for six 50 Watt simultaneous
inputs. If the power level or ambient temperature is low-
ered, the forced air requirement can be reduced.
Parameter
Impedance
Limit
Typical
—
50 Ohms Nom
1.40:1 Max
0.7dB Max
VSWR
1.20:1
0.4dB
0.20dB
24dB
—
Insertion Loss *
Amplitude Balance
Isolation
This device can be provided with type N connectors or
different power handling capability. M/A-COM also offers
a wide selection of cost effective devices for combining
and dividing any number of channels in popular cellular
transmit and receive bands. Please consult our factory.
0.35dB Max
20dB Min
Max Input Power
Operating Temp
50 Watts/Input
-40 to +60°C
—
*Above 7.78dB Theoretical Combining Loss
The Preliminary Specifications Data Sheet Contains Typical Electrical Specifications Which May Change Prior to Final Introduction.
M/A-COM, Inc.
1
North America: Tel. (800) 366-2266
Fax (800) 618-8883
■
Asia/Pacific: Tel. +81 3 3263 8761
Fax +81 3 3263 8769
■
Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020