NT256D72S89AKGU
256MB : 32M x 72
Low Profile Registered DDR SDRAM DIMM
184pin Low Profile Registered DDR SDRAM MODULE Based on 32Mx8 DDR SDRAM
Features
• 184-Pin 1U Registered 8-Byte Dual In-Line Memory Module
• 32Mx72 Double Data Rate (DDR) SDRAM DIMM
• Performance:
one-half clock post-amble
• Address and control signals are fully synchronous to positive
clock edge
• Programmable Operation:
- Device CAS Latency: 2, 2.5
- Burst Type: Sequential or Interleave
- Burst Length: 2, 4, 8
- Operation: Burst Read and Write
• Auto Refresh (CBR) and Self Refresh Modes
• Automatic and controlled precharge commands
• 13/10/1 Addressing (row/column/bank)
• 7.8 µs Max. Average Periodic Refresh Interval
• Serial Presence Detect
PC1600
-8B
3
100
10
PC2100
Unit
Speed Sort
DIMM CAS Latency*
f CK Clock Frequency
t CK Clock Cycle
-75B
-7K
3
133
7.5
266
3.5
133
7.5
MHz
ns
MHz
f DQ DQ Burst Frequency
200
266
• Intended for 100 MHz and 133 MHz applications
• Inputs and outputs are SSTL-2 compatible
• VDD = 2.5Volt ± 0.2, VDDQ = 2.5Volt ± 0.2
• SDRAMs have 4 internal banks for concurrent operation
• Differential clock inputs
• Gold contacts
• SDRAMs in 66-pin TSOP Type II Package
• Data is read or written on both clock edges
• Bi-directional data strobe with one clock cycle preamble and
*
One clock cycle added for registered DIMMs to account for input register.
Description
NT256D72S89AKGU is a Low Profile Registered 184-Pin 1U Double Data Rate (DDR) Synchronous DRAM Dual In-Line Memory Module
(DIMM), organized as a one-bank 32Mx72 high-speed memory array. The module uses nine 32Mx8 DDR SDRAMs in 400 mil TSOP II
packages. These DIMMs are manufactured using raw cards developed for broad industry use as reference designs. The use of these
common design files minimizes electrical variation between suppliers. All NANYA 184 DDR SDRAM DIMMs provide a high-performance,
flexible 8-byte interface in a 5.25” long space-saving footprint.
The DIMM is intended for use in applications operating up to 133 MHz clock speeds and achieves high-speed data transfer rates of up to
266 MHz. Prior to any access operation, the device CAS latency and burst type/ length/operation type must be programmed into the
DIMM by address inputs A0-A12 and I/O inputs BA0 and BA1 using the mode register set cycle. Clock enable CKE0 controls all devices
on the DIMM.
The DIMM uses serial presence-detect implemented via a serial 2,048-bit EEPROM using a standard IIC protocol. The first 128 bytes of
serial PD data are programmed and locked during module assembly. The remaining 128 bytes are available for use by the customer.
Ordering Information
Part Number
Speed
143MHz (7ns @ CL = 2.5)
Organization
32Mx72
Leads
Gold
Power
2.5V
NT256D72S89AKGU-7K
DDR266A
DDR266B
DDR200
PC2100
PC2100
PC1600
133MHz (7.5ns @ CL= 2)
133MHz (7.5ns @ CL= 2.5)
100MHz (10ns @ CL = 2)
125MHz (8ns @ CL = 2.5)
100MHz (10ns @ CL = 2)
NT256D72S89AKGU-75B
NT256D72S89AKGU-8B
REV 0.2 (Preliminary)
1
09/2002
© NANYA TECHNOLOGY CORP.
NANYA TECHNOLOGY CORP. reserves the right to change Products and Specifications without notice.