NP2600SA1, NP2600SB1,
NP2600SC1
Preferred Devices
Advance Information
Thyristor Surge Protector
High Voltage Bidirectional TSPD
http://onsemi.com
This Thyristor Surge Protective device (TSPD) prevents
overvoltage damage to sensitive circuits from lightning, induction and
power line crossings. This is a breakover-triggered crowbar protector.
Turn-of f occurs when the surge current falls below the holding current
value.
(
)
BIDIRECTIONAL TSPD
50, 80, AND 100 AMP SURGE
260 VOLTS
HIGH HOLD CURRENT
270 mA MIN
Features
•ꢀHigh Surge Current Capability: 50 A, 80 A & 100 A, 10 x 1000 msec,
for Controlled Temperature Environments
•ꢀThe NP2600Sx is used to help equipment meet various regulatory
requirements including: Bellcore 1089, ITU K.20 & K.21, IEC 950,
UL 1459 & 1950 and FCC Part 68.
MT1
MT2
•ꢀBidirectional Protection in a Single Device
•ꢀLittle Change of Voltage Limit with Transient Amplitude or Rate
•ꢀFreedom from Wearout Mechanisms Present in Non-Semiconductor
Devices
MARKING
DIAGRAM
SMB
AYWW
261xG
G
•ꢀFail-Safe, Shorts When Overstressed, Preventing Continued
Unprotected Operation
(No Polarity)
(JEDEC DO-214AA)
CASE 403C
•ꢀSurface Mount Technology
•ꢀ Indicates UL Registered - File #E210057
•ꢀThis is a Pb-Free Device
261x = Device Code
= A, B or C
x
A
Y
= Assembly Location
= Year
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
J
WW = Work Week
G
= Pb-Free Package
Rating
Off-State Voltage - Maximum
NP2600Sx1
Value
"220
Unit
(Note: Microdot may be in either location)
V
x = Series Ratings
ORDERING INFORMATION
A
B
C
†
Device
Package
Shipping
Maximum Pulse Surge Short Circuit
Current Non-Repetitive
Double Exponential Decay Waveform
(Notes 1 and 2)
A(pk)
NP2600SA1T3G
SMB
(Pb-Free)
2500/Tape & Reel
2500/Tape & Reel
2 x 10 ms
150
90
50
75
50
250
150
100
100
80
500
200
150
200
100
NP2600SB1T3G
NP2600SC1T3G
SMB
(Pb-Free)
10 x 160 ms
10 x 560 ms
5 x 310 ms
SMB
(Pb-Free)
2500/Tape & Reel
10 x 1000 ms
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
1. Allow cooling before testing second polarity.
2. Measured under pulse conditions to reduce heating.
3. Haefely test method.
Preferred devices are recommended choices for future use
and best overall value.
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
©ꢀ Semiconductor Components Industries, LLC, 2007
June, 2007 - Rev. P0
1
Publication Order Number:
NP2600S/D