NL3S22S
USB 2.0 + Audio Switch
The NL3S22S is a double−pole/double−throw (DPDT) analog
switch for routing high speed differential data and audio. The
high−speed data path is compliant with High Speed USB 2.0, Full
Speed USB 1.1, Low Speed USB 1.0 and any generic UART protocol.
The multi−purpose audio path is capable of passing signals with
negative voltages as low as 2 V below ground and features shunt
resistors to reduce Pop and Click noise in the audio system.
www.onsemi.com
MARKING
DIAGRAM
Features
• V Range: 2.7 V to 5.5 V
CC
• Control Pins Compatible with 1.8 V Interfaces
UQFN10
CASE 488AT
AW MG
• I : 23 mA (Typ)
CC
G
1
• ESD Performance: 4 kV HBM
• Available in1.4 mm x 1.8 mm UQFN10
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
AW
M
G
=
=
=
Device Code
Date Code
Pb−Free Device
(Note: Microdot may be in either location)
High Speed Data Path
• Input Signal Range: 0 V to 3.7 V
• R
: 5 W (Typ)
• C : 4.5 pF (Typ)
DS(on)
ORDERING INFORMATION
ON
†
Device
Package
Shipping
• Data Rate: USB 2.0–Compliant – up to 480 Mbps
NL3S22SMUTAG
UQFN10
(Pb−Free)
3000 / Tape &
Reel
Audio Path
• Input Signal Range: −2.0 V to 2.0 V
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
• R
• R
: 3 W (Typ)
DSON
: 0.002 W (Typ)
ON(FLAT)
• THD: 0.002% (R = 16 W / V = 0.4 V
)
L
IS
RMS
Applications
• Smartphones
• Tablets
• USB 2.0 Hosts/Peripherals
• Audio / High−Speeds Data Switching
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
October, 2016 − Rev. 0
NL3S22S/D