NL3S588
USB 2.0-Capable Ultra-Low
THD DPDT Switch
The NL3S588 is a single supply, bidirectional, double−pole/
double−throw (DPDT) switch suitable for both hi−fidelity audio and
high−speed data applications.
The NL3S588 features ultra-low distortion, high OFF−Isolation
analog switches that can pass analog signals that are positive and
negative with respect to ground. It is targeted at consumer and
professional DC−coupled GND−referenced audio switching
applications such as computer sound cards and home theater products.
The NL3S588 may also be used in high−speed differential data
routing applications. Both channels are USB 2.0−compliant.
www.onsemi.com
MARKING
DIAGRAM
UQFN10
MU SUFFIX
CASE 488AT
AX MG
G
1
Features
• DPDT Switch
AX
M
G
=
=
=
Device Code
Date Code
Pb−Free Device
• 3.3 V Single Supply Operation
• Available in 1.4 mm x 1.8 mm UQFN10
• This Device is Pb−Free, Halogen Free/BFR Free and RoHS
Compliant
(Note: Microdot may be in either location)
Audio Capabilities
PIN ASSIGNMENT
• 2 V
Signal Switching
RMS
• −116 dB THD+N into 20 kW Load at 2 V
RMS
• −112 dB THD+N into 32 W Load at 0.707 V
• Signal to Noise Ratio: > 125 dBV
RMS
10
9
8
•
•
0.004 dB Insertion Loss at 1 kHz, 20 kW Load
0.0008 dB Gain Variation 20 Hz to 20 kHz
SEL
V
DD
1
7
6
GND
Dp0
2
• 112 dB Signal Muting into 20 kW Load
• 131 dB PSRR 20 Hz to 20 kHz
3
4
5
High−Speed Data Capabilities
• Input Signal Range: 0 V to V
DD
(Top View)
• C : 8.9 pF (Typ)
ON
• Data Rate: USB 2.0–Compliant – up to 480 Mbps
• Bandwidth: 580 MHz
ORDERING INFORMATION
Applications
†
Device
NL3S588MUTBG
Package
Shipping
• Hi−Fi Audio Switching
• USB 2.0 High−Speed Data Switching
• USB 3.x Type C Switching
UQFN10
(Pb−Free)
3000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2017
1
Publication Order Number:
September, 2017 − Rev. 2
NL3S588/D